Equivalent & Substitute Parts for Ohmite 85F200

Part Overview

The Ohmite 85F200 is a 200 Ohms ±1% 5W axial wirewound through-hole resistor from the Acrasil® 80 series. This component is currently active in production with 796 pieces in stock. The 85F200 is classified as RoHS non-compliant, which may necessitate identification of compliant alternatives for applications subject to RoHS regulations or procurement policies requiring RoHS3 compliance.

Substiute Parts

85F200

OhmiteIn Stock: 90085F200 Datasheet

Current PartRFQ

45F200E

OhmiteIn Stock: 105045F200E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 85F200 is determined by matching the following critical parameters:

• Resistance value: 200 Ohms
• Tolerance: ±1%
• Power rating: 5W
• Composition: Wirewound
• Package type: Axial
• Physical dimensions: 0.343" Dia x 0.937" L (8.70mm x 23.80mm)
• Temperature coefficient: ±20ppm/°C
• Number of terminations: 2

The Ohmite 45F200E meets all electrical and mechanical specifications required for direct substitution. The primary distinction is regulatory compliance status and series designation.

Parameter Comparison

Engineering Selection Recommendations

The 45F200E is a direct electrical and mechanical equivalent to the 85F200. Both components are active products from Ohmite with identical resistance, tolerance, power rating, composition, package type, and physical dimensions.

The 45F200E is ROHS3 compliant, whereas the 85F200 is RoHS non-compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. The 45F200E is suitable for applications requiring RoHS3 compliance. Both parts maintain identical electrical performance characteristics and are mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can the 45F200E replace the 85F200 in existing designs?

A: Yes. The 45F200E is electrically and mechanically equivalent to the 85F200. Both components have identical resistance (200 Ohms), tolerance (±1%), power rating (5W), composition (wirewound), package type (axial), and physical dimensions (0.343" Dia x 0.937" L). Direct substitution is permissible from an electrical and mechanical standpoint.

Q: What is the primary difference between these two parts?

A: The primary difference is regulatory compliance status. The 45F200E is ROHS3 compliant, while the 85F200 is RoHS non-compliant. Both parts are manufactured by Ohmite and belong to different product series (Ohmicone® 40 versus Acrasil® 80).

Q: Are there any dimensional or thermal differences?

A: No. Both components have identical physical dimensions (0.343" Dia x 0.937" L / 8.70mm x 23.80mm) and identical temperature coefficients (±20ppm/°C).

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance, the 45F200E is the appropriate choice. For applications without RoHS compliance requirements, either part is suitable based on availability and procurement policy.

Q: Are both parts currently in production?

A: Yes. Both the 85F200 and 45F200E are active products with current inventory availability (796 and 1007 pieces respectively).