Equivalent & Substitute Parts for Qualtek 858-03/013

Part Overview

The Qualtek 858-03/013 is an AC power entry connector receptacle featuring IEC 320-C14 male blades with panel mount flange configuration. This filtered power entry module is designed for commercial applications requiring EMI/RFI suppression at 3A, 115/250VAC. The product is active and widely stocked, with 889 units available. Alternative components may be required due to design revisions, regional availability, or specific application requirements such as higher current ratings or different termination methods.

Substiute Parts

858-03/013

QualtekIn Stock: 987858-03/013 Datasheet

Current PartRFQ

PF0001/28

BulginIn Stock: 2401PF0001/28 Datasheet

DirectRFQ

6609017-5

TE Connectivity Corcom FiltersIn Stock: 9776609017-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Qualtek 858-03/013 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Connector Style: IEC 320-C14 (fixed requirement)
• Connector Type: Receptacle, Male Blades (fixed requirement)
• Number of Positions: 3 (fixed requirement)
• Mounting Type: Panel Mount, Flange (fixed requirement)

Allowable Variation Parameters:

• Current Rating: May be equal to or greater than 3A
• Voltage Rating: Must accommodate 115/250VAC or equivalent range
• Filter Type: May be filtered or unfiltered depending on application needs
• Termination: Quick Connect, Solder, or equivalent methods acceptable
• Approval Agencies: Must include CSA, UL, or VDE certification

The two identified substitute parts meet the mandatory compatibility parameters while offering variations in current capacity, filtering, and termination methods suitable for different application scenarios.

Parameter Comparison

Engineering Selection Recommendations

Qualtek 858-03/013 (Primary Component) Select this part for applications requiring filtered power entry at 3A with quick connect termination. All three regulatory certifications (CSA, UL, VDE) are present, and ROHS3 compliance is confirmed. This configuration is optimal for standard commercial AC power inlet applications with EMI/RFI suppression requirements.

Bulgin PF0001/28 (Higher Current Alternative) This substitute accommodates 10A current rating, providing design margin for applications exceeding 3A requirements. The unfiltered configuration requires external EMI/RFI filtering if noise suppression is critical. Solder termination necessitates different PCB layout considerations compared to quick connect. Regulatory certifications include ENEC in addition to CSA, UL, and VDE. Select this part when higher current capacity and modular construction are design priorities.

TE Connectivity Corcom Filters 6609017-5 (Direct Equivalent) This part maintains the 3A current rating and filtered configuration identical to the primary component. Quick connect termination with 0.250" (6.3mm) blade specification matches the original design. Front or rear side mount flexibility offers installation versatility. All required regulatory certifications are present. This part serves as a direct functional equivalent with manufacturer-recommended status.

Frequently Asked Questions (FAQ)

Q: Can the Bulgin PF0001/28 be used in place of the Qualtek 858-03/013 in a 3A application? A: Yes, the Bulgin part is electrically compatible at 3A operation. However, the unfiltered design requires external EMI/RFI filtering if the original filtered configuration was specified for noise-sensitive equipment. Solder termination requires PCB redesign compared to quick connect.

Q: What is the primary difference between the TE Connectivity 6609017-5 and the Qualtek 858-03/013? A: Both parts are functionally equivalent at 3A with filtered configuration and quick connect termination. The TE Connectivity part offers front or rear side mount flexibility and is manufacturer-recommended as a direct substitute.

Q: Are all three parts ROHS3 compliant? A: Yes, all three parts meet ROHS3 compliance requirements.

Q: Which substitute part requires the least design modification? A: The TE Connectivity Corcom Filters 6609017-5 requires minimal modification, as it maintains identical current rating, filtering, and quick connect termination specifications.

Q: Can the Bulgin PF0001/28 be used in applications requiring EMI/RFI filtering? A: The Bulgin part is unfiltered. External filtering components must be added to the circuit if EMI/RFI suppression is required by the application specification.

Q: What are the panel cutout dimension differences? A: Qualtek 858-03/013 requires 28.45mm x 21.60mm rectangular cutout. Bulgin PF0001/28 requires 27.30mm x 31.12mm. TE Connectivity 6609017-5 accommodates variable size cutouts. Panel redesign may be necessary when substituting between these parts.