Qualtek 853-05/013 LINE FILTER 5A CHASSIS MOUNT – Equivalent & Substitute Parts

Part Overview

The Qualtek 853-05/013 is an EMC/EMI line filter rated for 5 A AC applications with chassis mount configuration. This component is designed for general-purpose filtering in electronic equipment requiring electromagnetic compatibility compliance. The part maintains active product status and is ROHS3 compliant. Substitute parts are identified based on matching electrical ratings, mechanical mounting compatibility, and regulatory compliance standards.

Substiute Parts

853-05/013

QualtekIn Stock: 820853-05/013 Datasheet

Current PartRFQ

5ER7

TE Connectivity Corcom FiltersIn Stock: 7955ER7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Qualtek 853-05/013 is determined by the following critical parameters:

• Current Rating: 5 A minimum
• Mounting Type: Chassis Mount configuration
• Filter Classification: EMC/EMI line filter for general-purpose use
• Regulatory Compliance: ROHS3 compliance required
• Product Status: Active status preferred for ongoing availability

The identified substitute, TE Connectivity Corcom Filters 5ER7, meets these core substitution criteria through matching current capacity, chassis mount design, and active product status with ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Both the Qualtek 853-05/013 and TE Connectivity Corcom Filters 5ER7 maintain active product status with ROHS3 compliance, supporting long-term component availability and regulatory adherence. The TE Connectivity substitute provides additional specification detail including 250V AC rating, 50/60Hz frequency operation, and recognized approval certifications (CSA, UR, VDE), which may be advantageous for applications requiring documented compliance documentation. Selection between these parts should be based on specific application voltage requirements and any existing design qualification to either manufacturer's product line.

Frequently Asked Questions (FAQ)

Q: What are the primary substitution criteria for the Qualtek 853-05/013?

A: The main substitution criteria are 5 A current rating, chassis mount configuration, EMC/EMI filter classification, ROHS3 compliance, and active product status. Parts meeting these parameters are considered functionally equivalent for general-purpose applications.

Q: Does the TE Connectivity 5ER7 provide additional specifications compared to the Qualtek part?

A: Yes. The TE Connectivity 5ER7 specifies 250V AC rating, 50/60Hz operating frequency, -10°C to 40°C operating temperature range, and includes CSA, UR, and VDE approval certifications. The Qualtek 853-05/013 does not provide these detailed specifications in available documentation.

Q: Are there packaging differences between these parts?

A: The Qualtek 853-05/013 uses standard packaging, while the TE Connectivity 5ER7 is supplied in bulk packaging. Both are suitable for chassis mount installation.

Q: Can these parts be used interchangeably in existing designs?

A: Interchangeability depends on application-specific voltage and frequency requirements. The TE Connectivity 5ER7 is rated for 250V AC 50/60Hz operation. Verify that your application voltage and frequency requirements align with the substitute part specifications before implementation.

Q: What compliance standards apply to both parts?

A: Both parts are ROHS3 compliant. The TE Connectivity 5ER7 additionally carries CSA, UR, and VDE certifications. Confirm that your application requirements align with available certifications.