Huber+Suhner 85022993 (1399.17.0135) Wi-Fi Module RF Antenna Equivalent & Substitute Parts

Part Overview

The Huber+Suhner 85022993 (1399.17.0135) is a multi-band Wi-Fi module RF antenna designed for cellular and Wi-Fi applications. This antenna operates across five frequency bands with center frequencies at 798MHz, 838MHz, 915MHz, 2.025GHz, and 5.662GHz, providing coverage from 790MHz to 6.425GHz. The antenna features dual N Type Female connectors, chassis mount configuration, and IP69 ingress protection rating.

The product is currently classified as Obsolete. Identifying equivalent and substitute parts is necessary to maintain system compatibility, ensure continued availability for production and field replacement, and support long-term product lifecycle management.

Substiute Parts

85022993

Huber+Suhner, Inc.In Stock: 103085022993 Datasheet

Current PartRFQ

1399.17.0145

Huber+Suhner, Inc.In Stock: 7871399.17.0145 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Huber+Suhner 1399.17.0135 is determined by the following critical parameters:

Mechanical Compatibility:

• Termination type: N Type Female (2) connectors
• Mounting configuration: Chassis Mount
• Physical height: 1.575" (40.00mm) maximum
• Ingress protection rating: IP69

Electrical Compatibility:

• RF Family/Standard: Cellular, WiFi
• Frequency Group: Wide Band
• Antenna Type: Module
• Connector quantity: Dual connectors

Regulatory Compliance:

• REACH Status: REACH Unaffected
• ECCN: EAR99

The substitute part 1399.17.0135 (Huber+Suhner 1399.17.0145) maintains all critical mechanical and electrical parameters required for direct substitution. Both parts share identical termination types, mounting methods, physical dimensions, ingress protection ratings, and regulatory compliance classifications. The substitute part extends frequency coverage to six bands and provides enhanced gain characteristics across the operating spectrum.

Parameter Comparison

Engineering Selection Recommendations

The Huber+Suhner 1399.17.0145 is the manufacturer-recommended substitute for the obsolete 1399.17.0135. Selection of the substitute part is supported by the following factors:

Product Status Alignment: The 1399.17.0145 carries Active product status, ensuring continued manufacturer support, availability, and compliance with current regulatory requirements. The original part 1399.17.0135 is classified as Obsolete, making the substitute the appropriate choice for new designs and ongoing production requirements.

Mechanical Compatibility: Both parts maintain identical physical dimensions (1.575" maximum height), dual N Type Female terminations, chassis mount configuration, and IP69 ingress protection rating. These parameters ensure direct mechanical compatibility in existing mounting and connector configurations.

Regulatory Compliance: Both parts carry identical REACH Unaffected status and EAR99 ECCN classification, confirming equivalent regulatory standing for international distribution and deployment.

Frequency Coverage: The substitute part extends frequency coverage from five bands to six bands, with expanded frequency ranges that encompass the original part's operating spectrum. The substitute provides broader coverage from 694MHz to 7.125GHz compared to the original 790MHz to 6.425GHz range.

Frequently Asked Questions (FAQ)

Q: Can the 1399.17.0145 be used as a direct replacement for the 1399.17.0135 in existing installations?

A: Yes. Both parts share identical mechanical interfaces (N Type Female connectors, chassis mount), physical dimensions (1.575" height), and ingress protection ratings (IP69). The substitute part maintains full compatibility with existing mounting hardware and connector configurations.

Q: What is the primary difference between these two antenna models?

A: The 1399.17.0145 extends frequency band coverage from five to six bands and provides expanded frequency range coverage. The substitute operates from 694MHz to 7.125GHz compared to the original 790MHz to 6.425GHz range, offering broader spectrum support.

Q: Are there packaging differences between the main part and substitute?

A: The main part 1399.17.0135 is packaged as standard, while the substitute 1399.17.0145 is supplied in Bulk packaging. Both maintain identical product specifications and performance characteristics.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the 1399.17.0135 and 1399.17.0145 carry identical REACH Unaffected status and EAR99 ECCN classification, confirming equivalent regulatory compliance for all markets and applications.

Q: What is the cable length specification for each part?

A: The original part 1399.17.0135 features a 200mm cable. The substitute 1399.17.0145 offers cable options of 180mm or 240mm, providing flexibility for different installation requirements.

Q: Why is the original part classified as Obsolete?

A: The 1399.17.0135 is classified as Obsolete, indicating that the manufacturer has discontinued production. The 1399.17.0145 is the active replacement offering enhanced frequency coverage and continued manufacturer support.

Q: Are the gain characteristics comparable between the two parts?

A: Both parts provide gain specifications across their respective frequency bands. The 1399.17.0135 provides gains of 5dBi, 5dBi, 5dBi, 5dBi, and 7.5dBi across five bands. The 1399.17.0145 provides gains of 5dBi, 7dBi, 6.5dBi, 7.5dBi, 9dBi, and 8dBi across six bands, with enhanced performance in higher frequency bands.