Crouzet 83263041 SPDT Snap Action Switch Equivalent & Substitute Parts

Part Overview

The Crouzet 83263041 is an SPDT (Single Pole Double Throw) snap action switch designed for chassis mount applications with a 16A AC rating at 250V. This switch features a round pin plunger actuator and quick connect termination, making it suitable for industrial control and switching applications requiring reliable on-momentary operation. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity rating.

Equivalent and substitute parts are identified when applications require alternative voltage ratings, current specifications, or when sourcing from different manufacturers becomes necessary due to inventory constraints or design flexibility requirements.

Substiute Parts

83263041

CrouzetIn Stock: 91283263041 Datasheet

Current PartRFQ

V7-1C17D8

Honeywell Sensing and Productivity SolutionsIn Stock: 3269V7-1C17D8 Datasheet

SimilarRFQ

V7-2B17E9

Honeywell Sensing and Productivity SolutionsIn Stock: 2890V7-2B17E9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Crouzet 83263041 is determined by the following critical parameters:

Circuit Configuration: Both substitute parts maintain SPDT topology, preserving the switching logic of the original design.

Switch Function: All parts operate in on-momentary mode, ensuring functional compatibility in control circuits.

Actuator Type & Mounting: Round pin plunger actuators with chassis mount configuration are consistent across all parts, allowing direct mechanical interchange.

Termination Style: The Honeywell V7-1C17D8 uses identical 0.187" (4.7mm) quick connect terminals. The V7-2B17E9 uses 0.250" (6.3mm) terminals, requiring connector verification before substitution.

Voltage & Current Ratings: Substitute parts operate at reduced voltage (125V AC maximum) and current specifications. The V7-1C17D8 supports 15A AC, while the V7-2B17E9 supports 11A AC. These parts are suitable only for applications where the load requirements do not exceed their respective ratings.

Compliance & Certifications: All parts maintain RoHS compliance, unlimited MSL rating, and EAR99 export classification, ensuring regulatory compatibility.

Parameter Comparison

Engineering Selection Recommendations

Crouzet 83263041 Primary Selection: Use when applications require 250V AC operation or current loads exceeding 15A AC. This part is the only option among the three for high-voltage switching circuits. Product status is active with full RoHS compliance.

Honeywell V7-1C17D8 Substitution: Suitable for 125V AC applications with current requirements up to 15A AC. Termination compatibility is direct (0.187" quick connect). This part offers extended mechanical life (10,000,000 cycles) compared to the Crouzet part. Product status is active with RoHS compliance. Temperature range is reduced to -40°C to 85°C.

Honeywell V7-2B17E9 Substitution: Suitable for 125V AC applications with current requirements up to 11A AC. Termination requires connector adapter due to 0.250" (6.3mm) quick connect terminals. This part also provides extended mechanical life (10,000,000 cycles). Product status is active with RoHS compliance. Operating force is lower (75gf), which may affect actuation feel in manual control applications.

All three parts maintain regulatory compliance (RoHS, REACH unaffected, EAR99 classification) and unlimited moisture sensitivity rating, ensuring compatibility in standard industrial environments.

Frequently Asked Questions (FAQ)

Q: Can the Honeywell V7-1C17D8 directly replace the Crouzet 83263041?

A: Direct replacement is not possible for all applications. The V7-1C17D8 operates at 125V AC maximum, while the Crouzet part is rated for 250V AC. If your application operates at 125V AC or lower with current requirements up to 15A AC, the V7-1C17D8 is compatible. Termination connectors are identical (0.187" quick connect), allowing direct physical installation.

Q: What is the key difference between the two Honeywell substitutes?

A: The V7-1C17D8 supports 15A AC current, while the V7-2B17E9 supports 11A AC current. The V7-2B17E9 uses larger 0.250" (6.3mm) quick connect terminals instead of 0.187" terminals, requiring connector verification. The V7-2B17E9 has lower operating force (75gf vs. 150gf), which may affect manual actuation characteristics.

Q: Are there voltage or current limitations when substituting?

A: Yes. Substitute parts must not be used in applications exceeding their rated specifications. The Crouzet 83263041 is the only part rated for 250V AC. For 125V AC circuits, either Honeywell part is acceptable if current requirements are met: V7-1C17D8 for up to 15A AC, or V7-2B17E9 for up to 11A AC.

Q: Do the substitute parts have the same mechanical life?

A: No. The Crouzet 83263041 is rated for 1,000,000 mechanical cycles. Both Honeywell substitutes are rated for 10,000,000 mechanical cycles, providing significantly extended service life in high-cycle applications.

Q: Are all parts RoHS compliant?

A: Yes. The Crouzet 83263041, Honeywell V7-1C17D8, and Honeywell V7-2B17E9 are all RoHS compliant with unlimited moisture sensitivity rating (MSL 1), suitable for standard industrial applications without special handling requirements.

Q: What is the impact of different operating temperature ranges?

A: The Crouzet 83263041 operates from -20°C to 125°C. Both Honeywell substitutes operate from -40°C to 85°C. If your application requires operation above 85°C, the Crouzet part is required. For applications below -20°C, the Honeywell parts provide extended low-temperature capability.

Q: Can the V7-2B17E9 be used if termination connectors are adapted?

A: The V7-2B17E9 uses 0.250" (6.3mm) quick connect terminals instead of 0.187" (4.7mm). If connector adapters are available and verified for your application, the V7-2B17E9 can be used for 125V AC circuits with current requirements up to 11A AC. Verify adapter specifications and current-carrying capacity before implementation.