TE Connectivity 832-0200 Accelerometer Equivalent & Substitute Parts

Part Overview

The TE Connectivity Measurement Specialties 832-0200 is a triaxial IEPE accelerometer designed for motion sensing applications requiring ±200g acceleration measurement across X, Y, and Z axes. This surface mount device operates at 2kHz bandwidth with 3.3V to 5.5V supply voltage and IEPE output configuration.

The 832-0200 is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications currently utilizing this accelerometer.

Substiute Parts

832-0200

TE Connectivity Measurement SpecialtiesIn Stock: 979832-0200 Datasheet

Current PartRFQ

830M1-0200

TE Connectivity Measurement SpecialtiesIn Stock: 881830M1-0200 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification for the 832-0200 is based on the following critical parameters that determine functional and physical compatibility:

Mandatory Matching Parameters:

• Acceleration Range: ±200g
• Axis Configuration: X, Y, Z triaxial measurement
• Supply Voltage Range: 3.3V ~ 5.5V compatibility
• Mounting Type: Surface Mount
• RoHS Compliance Status: ROHS3 Compliant

Allowable Variation Parameters:

• Output Type: IEPE to Analog Voltage conversion acceptable with circuit redesign consideration
• Bandwidth: Substitute may exceed minimum 2kHz requirement
• Operating Temperature: Substitute may exceed -20°C ~ 80°C range
• Package/Case: Different surface mount packages acceptable if PCB layout permits
• Sensitivity: Different mV/g values acceptable if signal conditioning adjusted

The 830M1-0200 qualifies as a substitute based on matching acceleration range, triaxial axis configuration, supply voltage compatibility, surface mount capability, and RoHS3 compliance status.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 830M1-0200

The 830M1-0200 is the manufacturer-recommended substitute for the obsolete 832-0200. Selection of this substitute is supported by the following engineering factors:

Compliance and Availability:

• Active product status ensures ongoing supply chain availability
• ROHS3 compliance maintained for regulatory requirements
• Same manufacturer (TE Connectivity Measurement Specialties) provides design continuity and technical support

Functional Compatibility:

• Identical acceleration range (±200g) and triaxial axis configuration
• Matching supply voltage range (3.3V ~ 5.5V) ensures power circuit compatibility
• Enhanced bandwidth (2Hz ~ 15kHz) and extended operating temperature range (-40°C ~ 125°C) provide performance margin

Design Considerations:

• Output type change from IEPE to Analog Voltage requires signal conditioning circuit modification
• Sensitivity increase from 3.25 mV/g to 6.3 mV/g necessitates analog-to-digital converter or amplifier adjustment
• Package change from 5-SMD to 12-LCC requires PCB layout redesign and footprint modification
• Integrated temperature sensor in 830M1-0200 provides additional functionality not present in 832-0200

Implementation Path: Substitution of 832-0200 with 830M1-0200 requires hardware redesign including signal conditioning interface, PCB layout modification, and firmware adjustment for sensitivity calibration. The substitute part is suitable for new designs and production transitions where these modifications are feasible.

Frequently Asked Questions (FAQ)

Q: Can the 830M1-0200 be used as a direct drop-in replacement for the 832-0200?

A: No. While both parts share identical acceleration range, triaxial configuration, and supply voltage specifications, the 830M1-0200 requires circuit modifications. The output type differs (Analog Voltage vs. IEPE), sensitivity is doubled (6.3 mV/g vs. 3.25 mV/g), and the package changes from 5-SMD to 12-LCC. PCB layout redesign and signal conditioning circuit modification are necessary.

Q: What is the primary reason for substituting the 832-0200?

A: The 832-0200 is classified as obsolete product status. The 830M1-0200 is the manufacturer-recommended substitute with active production status, ensuring long-term supply chain availability and technical support.

Q: Are both parts manufactured by the same company?

A: Yes. Both the 832-0200 and 830M1-0200 are manufactured by TE Connectivity Measurement Specialties, ensuring design consistency and technical compatibility within the same product family.

Q: What are the key electrical differences between these parts?

A: The primary electrical differences are output type (IEPE vs. Analog Voltage) and sensitivity (3.25 mV/g vs. 6.3 mV/g). The 830M1-0200 provides higher sensitivity and extended bandwidth (2Hz ~ 15kHz vs. 2kHz), requiring signal conditioning adjustment in the receiving circuit.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the 832-0200 and 830M1-0200 are ROHS3 compliant, meeting current regulatory requirements for hazardous substance restrictions.

Q: What package modifications are required for substitution?

A: The 832-0200 uses a 5-SMD No Lead package, while the 830M1-0200 uses a 12-LCC package. PCB footprint redesign is required to accommodate the different package geometry and pin configuration.

Q: Can the 830M1-0200 operate in the same temperature range as the 832-0200?

A: The 830M1-0200 exceeds the 832-0200 temperature range. The 832-0200 operates from -20°C to 80°C, while the 830M1-0200 operates from -40°C to 125°C, providing extended environmental capability.

Q: What additional features does the 830M1-0200 provide?

A: The 830M1-0200 includes an integrated temperature sensor not present in the 832-0200, providing additional environmental monitoring capability within a single component.