8302AMLFT-ST Equivalent & Substitute Parts

Part Overview

The 8302AMLFT-ST is a Clock Buffer IC manufactured by Renesas Electronics Corporation, classified as a clock/timing component in the 8SOIC package. This device is designated as Obsolete product status, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity. The obsolescence of this component requires engineers to evaluate active substitute parts that maintain compatibility with existing circuit designs while ensuring long-term component availability.

Substiute Parts

8302AMLFT-ST

Renesas Electronics CorporationIn Stock: 9128302AMLFT-ST Datasheet

Current PartRFQ

5PB1102CMGI8

Renesas Electronics CorporationIn Stock: 189455PB1102CMGI8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 5PB1102CMGI8 is identified as a functionally equivalent substitute for the 8302AMLFT-ST based on the following substitution criteria:

Primary Substitution Basis:

• Both components are Clock/Timing ICs manufactured by Renesas Electronics Corporation
• Both devices maintain ROHS3 Compliance certification
• Both components feature MSL Level 1 (Unlimited) moisture sensitivity rating
• The 5PB1102CMGI8 is an Active product with current manufacturing and inventory availability

Functional Classification: The 5PB1102CMGI8 operates as a Clock Fanout Buffer (Distribution) IC with 1:2 ratio configuration, providing clock signal distribution functionality consistent with clock buffer applications. The device supports LVCMOS input and output signaling with a maximum frequency rating of 200 MHz and operates across a supply voltage range of 1.71V to 3.465V.

Parameter Comparison

Engineering Selection Recommendations

Compliance and Certification Alignment: The 5PB1102CMGI8 maintains full ROHS3 Compliance and MSL Level 1 certification, ensuring regulatory and environmental compliance consistency with the original 8302AMLFT-ST specification. Both components are manufactured by Renesas Electronics Corporation, providing supply chain continuity from a single qualified manufacturer.

Product Status Consideration: The 8302AMLFT-ST is classified as Obsolete, indicating discontinued manufacturing and limited remaining inventory. The 5PB1102CMGI8 maintains Active product status with substantial inventory availability (18,900 Pcs New Original In Stock), ensuring long-term procurement viability and production continuity.

Package Transition: The substitution requires transition from 8SOIC packaging to 8-UFDFN (8-VFQFN 2x2) surface mount packaging. This package change necessitates PCB layout modification and footprint redesign. The 8-UFDFN package represents a smaller form factor compared to traditional SOIC packages, potentially enabling space optimization in redesigned circuits.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the 8302AMLFT-ST?

A: The 8302AMLFT-ST is classified as Obsolete, indicating discontinued manufacturing. The 5PB1102CMGI8 provides an active, currently manufactured alternative with equivalent compliance certifications and clock/timing functionality.

Q: Are there compliance differences between the original and substitute part?

A: Both the 8302AMLFT-ST and 5PB1102CMGI8 maintain ROHS3 Compliance and MSL Level 1 (Unlimited) ratings. No compliance degradation occurs with this substitution.

Q: What packaging changes are required for the 5PB1102CMGI8 substitution?

A: The original 8302AMLFT-ST uses 8SOIC packaging, while the 5PB1102CMGI8 uses 8-UFDFN (8-VFQFN 2x2) surface mount packaging. PCB footprint redesign is required to accommodate the different package geometry and pin configuration.

Q: What is the functional difference between the original and substitute clock buffer?

A: The 5PB1102CMGI8 is specified as a Clock Fanout Buffer (Distribution) IC with 1:2 ratio configuration, supporting LVCMOS signaling at frequencies up to 200 MHz with supply voltage range 1.71V to 3.465V and operating temperature range -40°C to 85°C.

Q: Is the 5PB1102CMGI8 available in alternative packaging options?

A: The 5PB1102CMGI8 is supplied in Cut Tape (CT) and Digi-Reel® packaging formats. The device package is specified as 8-UFDFN with supplier device package designation 8-VFQFN (2x2).

Q: What inventory status should be considered for production planning?

A: The 5PB1102CMGI8 maintains 18,900 Pcs New Original In Stock, providing substantial inventory availability for production requirements. The original 8302AMLFT-ST has 842 Pcs remaining inventory with Obsolete status, indicating limited future availability.