830035264 Crystal 16.0000MHz 16pF SMD Equivalent & Substitute Parts

Part Overview

The Würth Elektronik 830035264 is a 16 MHz fundamental mode crystal oscillator designed for surface mount applications. This component operates at 16 MHz with a frequency stability of ±50ppm and a load capacitance of 16pF. The part is housed in a 4-SMD, No Lead package measuring 3.20mm x 2.50mm with a maximum seated height of 0.80mm. The 830035264 maintains Active product status and is ROHS3 compliant. Equivalent substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain optimization is required.

Substiute Parts

830035264

Würth ElektronikIn Stock: 3257830035264 Datasheet

Current PartRFQ

LFXTAL035264

IQD Frequency ProductsIn Stock: 15271LFXTAL035264 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 830035264 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following specifications without deviation:

• Frequency: 16 MHz
• Frequency Stability: ±50ppm
• Load Capacitance: 16pF
• ESR: 70 Ohms
• Operating Mode: Fundamental
• Operating Temperature Range: -10°C ~ 60°C
• Package / Case: 4-SMD, No Lead
• Physical Dimensions: 3.20mm x 2.50mm
• Maximum Seated Height: 0.80mm
• Mounting Type: Surface Mount
• RoHS Compliance: ROHS3 Compliant

The IQD Frequency Products LFXTAL035264 meets all specified parameters and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Würth Elektronik 830035264 and IQD Frequency Products LFXTAL035264 are Active status products with full ROHS3 compliance and REACH Unaffected designation. Selection between these parts is based on availability, supply chain requirements, and inventory status. The 830035264 is available with 3175 pieces in stock, while the LFXTAL035264 is available with 15222 pieces in stock. Both parts carry identical electrical specifications, mechanical dimensions, and regulatory certifications. Either part is suitable for direct substitution in applications requiring a 16 MHz fundamental mode crystal with 16pF load capacitance and 70 Ohms ESR.

Frequently Asked Questions (FAQ)

Q: Can the LFXTAL035264 be used as a direct replacement for the 830035264?

A: Yes. The LFXTAL035264 is a parametric equivalent with identical electrical specifications, load capacitance, ESR, operating temperature range, and physical dimensions. Both parts are housed in 4-SMD, No Lead packages with matching footprints.

Q: Are there any differences in the package footprint between these parts?

A: No. Both the 830035264 and LFXTAL035264 use the 4-SMD, No Lead package with identical dimensions of 3.20mm x 2.50mm and a maximum seated height of 0.80mm.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, REACH Unaffected, and classified under ECCN EAR99 with HTSUS code 8541.60.0050.

Q: What is the frequency stability of these crystals?

A: Both parts have a frequency stability of ±50ppm across the operating temperature range of -10°C to 60°C.

Q: Are there any differences in ESR between the two parts?

A: No. Both the 830035264 and LFXTAL035264 have an ESR of 70 Ohms.

Q: Can these crystals be used in applications requiring higher temperature operation?

A: The specified operating temperature range for both parts is -10°C to 60°C. Applications requiring operation outside this range require alternative components with extended temperature specifications.

Q: What is the load capacitance requirement for these crystals?

A: Both parts require a load capacitance of 16pF. The circuit design must provide matching load capacitance for proper frequency operation.