TE Connectivity 828277-5 D-Sub Backshell Equivalent & Substitute Parts

Part Overview

The TE Connectivity 828277-5 is a 15-position two-piece backshell connector from the AMPLIMITE HD-20 series, designed for D-Sub applications with shielded configuration and dual cable exit angles of 45° and 180°. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing procurement and system integration. The backshell provides mechanical protection, shielding, and strain relief for D-Sub connector assemblies in 15-position and HD26-position configurations.

Substiute Parts

828277-5

TE Connectivity AMP ConnectorsIn Stock: 1148828277-5 Datasheet

Current PartRFQ

5-1478762-2

TE Connectivity AMP ConnectorsIn Stock: 13905-1478762-2 Datasheet

SimilarRFQ

5748676-2

TE Connectivity AMP ConnectorsIn Stock: 53535748676-2 Datasheet

SimilarRFQ

955-015-030R121

NorComp Inc.In Stock: 1144955-015-030R121 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 828277-5 is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• Number of Positions: 15
• Compatible Shell Size: A
• Compatible D-Sub Size: 15pos and HD26pos
• Shielding: Shielded
• Accessory Type: Two Piece Backshell
• Cable Type: Round
• Hardware: Mating Screws 4-40
• Color: Silver

Secondary Compatibility Criteria:

• Moisture Sensitivity Level: 1 (Unlimited)
• Plating: Nickel or Nickel over Copper
• Primary Material: Plastic or Metal

Variable Parameters (Non-Critical for Substitution):

• Cable Exit Angles: 45°, 180° (main part) vs. 180° only (substitute parts 5-1478762-2 and 5748676-2) or 45°, 180° (substitute part 955-015-030R121)
• Product Status: Obsolete (main part) vs. Active (all substitute parts)
• Manufacturer: TE Connectivity AMP Connectors (main part) vs. TE Connectivity AMP Connectors or NorComp Inc. (substitute parts)
• Series: AMPLIMITE HD-20 (main part) vs. ADK, AMPLIMITE HD-20, or 955/ARMOR (substitute parts)

The three identified substitute parts satisfy all primary and secondary compatibility criteria. Differences in cable exit angle configuration and product series do not preclude substitution when the application requires only 180° cable exit capability.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5748676-2 (Primary Recommendation)

The 5748676-2 is the preferred substitute for the obsolete 828277-5. This part maintains identical series designation (AMPLIMITE HD-20), shares the same base product lineage, and provides full mechanical and electrical compatibility. The 5748676-2 is ROHS3 compliant and carries active product status with the highest inventory availability (5294 units). The material composition (Metal, Zinc Alloy with Nickel over Copper plating) provides equivalent shielding performance to the original plastic backshell. The 180° cable exit configuration satisfies applications requiring single-angle cable routing. Bulk packaging accommodates high-volume procurement requirements.

TE Connectivity 5-1478762-2 (Secondary Recommendation)

The 5-1478762-2 serves as an alternative substitute from the TE Connectivity AMP Connectors product line. This part is ROHS3 compliant with active product status and provides full dimensional and electrical compatibility. The ADK series designation indicates a different product family within TE Connectivity's connector portfolio. Metal construction (Zinc with Nickel plating) and 180° cable exit configuration align with the 5748676-2. Box packaging is suitable for standard procurement workflows. Inventory availability (1315 units) supports ongoing supply requirements.

NorComp 955-015-030R121 (Alternative Recommendation)

The 955-015-030R121 provides cross-manufacturer substitution capability from NorComp Inc. This part is ROHS3 compliant and carries active product status. The dual cable exit angle configuration (45°, 180°) matches the original 828277-5 specification, providing direct functional equivalence for applications requiring both angle options. Metal construction (Zinc Alloy with Nickel over Copper plating) ensures equivalent shielding performance. REACH Unaffected status simplifies regulatory compliance for certain supply chain requirements. Inventory availability (1111 units) supports procurement needs.

Selection Criteria Summary:

• For AMPLIMITE HD-20 series continuity: Select 5748676-2
• For TE Connectivity single-source preference: Select 5-1478762-2 or 5748676-2
• For dual cable exit angle requirement: Select 955-015-030R121
• For REACH Unaffected compliance: Select 955-015-030R121
• For maximum inventory availability: Select 5748676-2

Frequently Asked Questions (FAQ)

Q: Can the 5748676-2 directly replace the obsolete 828277-5 in existing assemblies?

A: Yes. The 5748676-2 provides direct mechanical and electrical compatibility. Both parts share identical position count (15), shell size (A), D-Sub compatibility (15pos and HD26pos), shielding configuration, cable type (round), and hardware specification (Mating Screws 4-40). The primary difference is cable exit angle limitation to 180° on the 5748676-2 versus dual 45°/180° on the 828277-5. If the application uses only 180° cable exit, substitution is direct. If 45° cable exit is required, the 955-015-030R121 is the appropriate selection.

Q: What is the material difference between the 828277-5 and its substitutes?

A: The original 828277-5 uses plastic (Polycarbonate) construction, while all three substitute parts employ metal construction (Zinc or Zinc Alloy). Metal backshells provide enhanced shielding effectiveness and mechanical durability. Both material types satisfy the shielded connector requirement and maintain equivalent electrical performance for D-Sub applications.

Q: Are all substitute parts RoHS compliant?

A: Yes. All three substitute parts (5-1478762-2, 5748676-2, and 955-015-030R121) are ROHS3 compliant. The original 828277-5 carries "Not applicable" RoHS status due to its obsolete classification. Current procurement should utilize ROHS3 compliant alternatives.

Q: Which substitute part has the best inventory availability?

A: The 5748676-2 has the highest inventory availability with 5294 units in stock, followed by the 5-1478762-2 with 1315 units and the 955-015-030R121 with 1111 units. The 828277-5 original part has 1117 units available but is obsolete.

Q: What is the difference in cable exit angle configuration between the substitute parts?

A: The 5-1478762-2 and 5748676-2 support 180° cable exit only. The 955-015-030R121 supports dual cable exit angles of 45° and 180°, matching the original 828277-5 specification. Selection depends on application cable routing requirements.

Q: Can I use the 955-015-030R121 from NorComp as a cross-manufacturer substitute?

A: Yes. The 955-015-030R121 provides full mechanical and electrical compatibility with the 828277-5. Cross-manufacturer substitution is valid when all critical parameters align: position count, shell size, D-Sub compatibility, shielding, cable type, and hardware specification. The NorComp part satisfies all these criteria and is ROHS3 compliant with active product status.

Q: What packaging options are available for the substitute parts?

A: The 5-1478762-2 is supplied in Box packaging, the 5748676-2 in Bulk packaging, and the 955-015-030R121 in Bag packaging. Packaging selection should align with procurement volume and inventory management requirements.

Q: Are there any REACH compliance differences between the substitute parts?

A: Yes. The 5-1478762-2 has Vendor Undefined REACH status, the 5748676-2 is REACH Affected, and the 955-015-030R121 is REACH Unaffected. Applications subject to REACH regulatory requirements should select the 955-015-030R121 for simplified compliance documentation.

Q: What is the Moisture Sensitivity Level (MSL) for the substitute parts?

A: The 5-1478762-2 and 5748676-2 both carry MSL 1 (Unlimited), matching the original 828277-5. The 955-015-030R121 carries MSL Not Applicable. MSL 1 indicates no moisture sensitivity restrictions for storage and handling.