TE Connectivity 826647-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 826647-3 is a rectangular connector header manufactured under the AMPMODU Mod II series. This through-hole connector features 3 positions with 0.100" (2.54mm) pitch spacing, male pin contacts, and solder termination. The part is actively produced and maintains full inventory availability with 1234 pieces in stock. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters including connector pitch, position count, contact type, mounting method, and operating temperature range. Alternative sources become necessary for supply chain continuity, cost optimization, or specific application requirements where functionally equivalent designs from alternative manufacturers provide identical performance characteristics.

Key Parameters

Parameter	Value
Manufacturer Part Number	826647-3
Manufacturer	TE Connectivity AMP Connectors
Series	AMPMODU Mod II
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	3
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Operating Temperature	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0
Current Rating	5A
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 826647-3 are identified through strict alignment with the following critical parameters:

Primary Matching Criteria:

Pitch spacing: 0.100" (2.54mm)
Position count: 3 positions
Row configuration: 1 row
Contact type: Male pin
Mounting method: Through hole
Termination method: Solder
Connector style: Header, breakaway configuration
Fastening type: Push-Pull
Shrouding: Unshrouded
Material flammability: UL94 V-0

Secondary Compatibility Factors:

Operating temperature range compatibility
Contact finish materials (gold or tin acceptable)
Insulation material composition
RoHS and REACH compliance status
Current rating capacity

All substitute parts listed maintain functional equivalence within these defined parameters. Variations in contact length, insulation height, and contact finish thickness do not preclude substitution when the primary mating and electrical characteristics remain consistent.

Parameter Comparison

Parameter	826647-3 (TE)	0022285034 (Molex)	0901200123 (Molex)	0901200763 (Molex)	0901200923 (Molex)	2303-6111-TG (3M)	861400031YO8LF (Amphenol)	929400-01-03-RK (3M)	929647-01-03-EU (3M)	929647-01-03-I (3M)	929647-02-03-EU (3M)
Manufacturer	TE Connectivity	Molex	Molex	Molex	Molex	3M	Amphenol ICC	3M	3M	3M	3M
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	3	3	3	3	3	3	3	3	3	3	3
Number of Rows	1	1	1	1	1	1	1	1	1	1	1
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Connector Type	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-65°C ~ 105°C	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Current Rating (Amps)	5A	Not specified	Not specified	Not specified	Not specified	3A	3A	2.5A	2.5A	2.5A	2.5A
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS Compliant	Not specified	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
ECCN	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The Molex C-Grid III series parts (0901200123, 0901200763, 0901200923) provide the closest functional equivalence to the TE Connectivity 826647-3. These parts maintain identical pitch spacing, position count, contact configuration, and mounting characteristics. All three variants are ROHS3 compliant and actively produced. The operating temperature range extends to -55°C to 125°C, providing broader thermal coverage than the original part. These substitutes are suitable for direct replacement in applications where the extended temperature capability is beneficial or neutral.

Secondary Substitutes (Acceptable Alternatives):

The 3M 929 series headers (929647-01-03-EU, 929647-01-03-I, 929647-02-03-EU) maintain core connector specifications with identical pitch and position configuration. These parts are RoHS compliant and actively produced. The operating temperature range of -40°C to 105°C covers the original part's specification within the upper thermal limit. Current rating of 2.5A is lower than the original 5A specification; applications requiring the full 5A capacity should not use these substitutes. The 929647-02-03-EU variant features extended post length (0.210") suitable for applications requiring deeper board penetration.

Compliance-Restricted Substitutes:

The 3M 2303-6111-TG is not RoHS3 compliant and carries REACH affected status. This part is suitable only for applications where RoHS compliance is not required. The Amphenol ICC 861400031YO8LF is RoHS compliant with REACH affected status and provides equivalent core specifications with extended operating temperature range to 125°C.

Inventory Availability:

Molex 0901200763 maintains the highest inventory level at 37,719 pieces. Molex 0901200123 provides 30,235 pieces. 3M 929647-02-03-EU offers 3,469 pieces. The original TE Connectivity 826647-3 maintains 1,234 pieces in stock.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901200123 directly replace the TE Connectivity 826647-3?

A: Yes. Both parts share identical pitch spacing (0.100"), position count (3), contact type (male pin), mounting method (through hole), and solder termination. The Molex part is ROHS3 compliant and actively produced. The extended operating temperature range (-55°C to 125°C) is compatible with applications designed for the original part's -65°C to 105°C specification.

Q: What is the current rating limitation when using 3M 929 series substitutes?

A: The 3M 929 series headers carry a 2.5A current rating, compared to the original TE Connectivity 826647-3 rating of 5A. Applications requiring current capacity above 2.5A must not use these substitutes. Verify application current requirements before selection.

Q: Are all listed substitutes RoHS3 compliant?

A: No. The 3M 2303-6111-TG is RoHS non-compliant. All Molex C-Grid III variants (0901200123, 0901200763, 0901200923) and 3M 929 series parts are ROHS3 compliant. The Amphenol ICC 861400031YO8LF is RoHS compliant but not specifically ROHS3 certified. Verify compliance requirements for your application before part selection.

Q: What is the difference between the three Molex C-Grid III variants?

A: All three Molex C-Grid III parts (0901200123, 0901200763, 0901200923) maintain identical core specifications. The primary differences are contact finish on the mating end (tin for 0901200123, gold for 0901200763 and 0901200923) and packaging format (bulk for 0901200123 and 0901200763, tray for 0901200923). Electrical and mechanical performance is equivalent across all three variants.

Q: Can I use the 3M 929647-02-03-EU in place of 929647-01-03-EU?

A: Both parts are functionally equivalent with identical pitch, position count, and contact configuration. The primary difference is post length: 929647-02-03-EU features 0.210" post length compared to 0.110" for 929647-01-03-EU. Selection depends on board thickness and mounting depth requirements. Verify PCB thickness compatibility before substitution.

Q: What packaging options are available for substitutes?

A: Most substitutes are supplied in bulk packaging. The Molex 0901200923 is supplied in tray packaging. Verify packaging requirements for your procurement and assembly processes before part selection.

Q: Are there REACH compliance differences among the substitutes?

A: Yes. Molex C-Grid III parts and 3M 929 series are REACH unaffected. The 3M 2303-6111-TG and Amphenol ICC 861400031YO8LF are REACH affected. Applications subject to REACH regulations should select REACH unaffected alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message