Amphenol RF 82-6095-RFX N Type Coaxial Connector Receptacle Equivalent & Substitute Parts

Part Overview

The Amphenol RF 82-6095-RFX is an N Type connector receptacle with female socket configuration, designed for 50 ohm RF applications. This panel mount solder termination connector operates across frequencies up to 11 GHz and maintains active product status with full RoHS compliance. The connector features extended insulation, gold-plated phosphor bronze center contacts, and nickel-finished brass body construction. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative manufacturer selection.

Substiute Parts

82-6095-RFX

Amphenol RFIn Stock: 110282-6095-RFX Datasheet

Current PartRFQ

0731000030

MolexIn Stock: 15310731000030 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol RF 82-6095-RFX is determined by strict alignment of electrical and mechanical parameters. The substitute part Molex 0731000030 qualifies as a direct equivalent based on the following criteria:

Matching Parameters (Substitution Basis):

• Connector Style: N Type
• Connector Type: Receptacle, Female Socket
• Impedance: 50 Ohms
• Contact Termination: Solder
• Shield Termination: Solder
• Mounting Type: Panel Mount
• Mounting Feature: Flange
• Fastening Type: Threaded
• Frequency - Max: 11 GHz
• Number of Ports: 1
• Dielectric Material: Polytetrafluoroethylene (PTFE)
• Body Material: Brass
• Body Finish: Nickel
• Center Contact Plating: Gold
• Mating Cycles: 500
• MSL: 1 (Unlimited)

These aligned parameters confirm functional and mechanical interchangeability for RF coaxial connector applications requiring N Type receptacle female socket configuration at 50 ohm impedance with solder termination.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol RF 82-6095-RFX and Molex 0731000030 maintain active product status and comply with RoHS regulations, confirming their suitability for current production and procurement cycles. The Amphenol RF part carries RoHS Compliant certification, while the Molex substitute carries ROHS3 Compliant certification, both meeting regulatory requirements for electronic component manufacturing.

The primary distinction between these parts lies in center contact material composition and operating temperature range. The Amphenol RF 82-6095-RFX utilizes phosphor bronze center contacts with an operating temperature range of -65°C to 165°C, while the Molex 0731000030 employs beryllium copper center contacts with an operating temperature range of -55°C to 125°C. Both materials provide suitable electrical conductivity and mechanical durability for N Type connector applications.

Selection between these parts should be based on specific application requirements regarding operating temperature extremes and material compatibility. The Molex part includes REACH Affected status notation, requiring consideration in applications subject to REACH regulatory frameworks. Both parts share identical electrical specifications, mechanical mounting configurations, and RF performance characteristics up to 11 GHz.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0731000030 directly replace the Amphenol RF 82-6095-RFX in existing designs?

A: Yes. Both connectors share identical N Type receptacle female socket configuration, 50 ohm impedance, solder termination, panel mount flange mounting, threaded fastening, and 11 GHz maximum frequency specification. The mechanical and electrical interfaces are equivalent.

Q: What is the significance of the different center contact materials?

A: The Amphenol RF part uses phosphor bronze center contacts while the Molex part uses beryllium copper. Both materials provide adequate electrical conductivity and mechanical durability for RF applications. Material selection may influence contact resistance characteristics and long-term reliability in specific environmental conditions, but both are suitable for standard N Type connector applications.

Q: Are there operating temperature limitations when substituting these parts?

A: The Amphenol RF 82-6095-RFX operates from -65°C to 165°C, while the Molex 0731000030 operates from -55°C to 125°C. Applications requiring operation below -55°C or above 125°C must use the Amphenol RF part. Applications within the -55°C to 125°C range are compatible with either part.

Q: What packaging differences exist between these parts?

A: The Amphenol RF 82-6095-RFX is supplied in Bulk packaging, while the Molex 0731000030 is supplied in Tray packaging. Packaging format does not affect connector functionality or performance but may influence inventory management and handling procedures.

Q: Do both parts meet current compliance standards?

A: Yes. The Amphenol RF 82-6095-RFX is RoHS Compliant, and the Molex 0731000030 is ROHS3 Compliant. Both parts carry EAR99 ECCN classification and 8536.69.4010 HTSUS code. The Molex part carries additional REACH Affected status notation.

Q: Are the mating cycle ratings identical?

A: Yes. Both the Amphenol RF 82-6095-RFX and Molex 0731000030 are rated for 500 mating cycles, indicating equivalent mechanical durability and connector lifespan expectations.

Q: What is the significance of MSL Level 1 for both parts?

A: MSL Level 1 (Unlimited) indicates that both connectors have unlimited shelf life and do not require special moisture control storage conditions. This simplifies inventory management and reduces storage complexity compared to higher MSL level components.