TE Connectivity 8-2176093-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 8-2176093-4 is a 76.8 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative specifications better suit application requirements.

Substiute Parts

8-2176093-4

TE Connectivity Passive ProductIn Stock: 15248-2176093-4 Datasheet

Current PartRFQ

ERA-6AEB7682V

Panasonic Electronic ComponentsIn Stock: 4552ERA-6AEB7682V Datasheet

DirectRFQ

RG2012P-7682-B-T5

SusumuIn Stock: 6057RG2012P-7682-B-T5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 8-2176093-4 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 76.8 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they meet or exceed the thermal requirements of applications designed for 0.25W (1/4W) components in the same package footprint
• Physical Height: Variation within seated height specifications (0.020" to 0.026") is acceptable provided the package remains 0805 (2012 Metric)

The identified substitute parts maintain electrical equivalence and mechanical compatibility while offering additional certifications (AEC-Q200 automotive qualification) and enhanced features (anti-sulfur coating) in certain cases.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 8-2176093-4 (Primary Part) Select this part for applications where the 0.25W (1/4W) power rating is specified and non-automotive qualification is acceptable. This component is suitable for general industrial and commercial applications requiring standard thin film resistor performance.

Panasonic ERA-6AEB7682V (Substitute) This part is suitable for automotive applications requiring AEC-Q200 qualification. The 0.125W (1/8W) power rating is compatible with circuit designs that do not exceed this thermal limit. The reduced physical height (0.024" vs. 0.026") provides improved clearance in space-constrained layouts.

Susumu RG2012P-7682-B-T5 (Substitute) This part is suitable for automotive applications requiring both AEC-Q200 qualification and anti-sulfur coating for enhanced environmental resistance. The 0.125W (1/8W) power rating and minimal physical height (0.020") support compact PCB designs. All three parts maintain identical electrical specifications and mechanical compatibility within the 0805 (2012 Metric) package footprint.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB7682V or Susumu RG2012P-7682-B-T5 be used as direct replacements for the TE Connectivity 8-2176093-4?

A: Yes. Both substitute parts maintain identical resistance (76.8 kOhms), tolerance (±0.1%), temperature coefficient (±25ppm/°C), operating temperature range (-55°C ~ 155°C), and package footprint (0805 / 2012 Metric). The reduced power rating (0.125W vs. 0.25W) is acceptable in applications where circuit design does not require the higher thermal capacity of the primary part.

Q: What is the significance of the power rating difference between the primary part and substitutes?

A: The TE Connectivity 8-2176093-4 is rated at 0.25W (1/4W), while the Panasonic and Susumi substitutes are rated at 0.125W (1/8W). In the same 0805 package, lower power ratings indicate reduced thermal dissipation capability. Substitution is valid only when the application circuit design operates within the 0.125W thermal limit. If the circuit requires sustained power dissipation exceeding 0.125W, the primary part must be used.

Q: Are there mechanical compatibility concerns when substituting these parts?

A: No. All three parts share identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations. Physical height variations (0.020" to 0.026" seated) are within acceptable tolerances for standard PCB assembly processes and do not affect electrical performance or mechanical fit.

Q: What certifications differentiate the substitute parts from the primary part?

A: The Panasonic ERA-6AEB7682V and Susumu RG2012P-7682-B-T5 both carry AEC-Q200 automotive qualification, which the TE Connectivity 8-2176093-4 does not specify. The Susumu part additionally features anti-sulfur coating for enhanced environmental resistance in corrosive atmospheres. These certifications make the substitutes suitable for automotive and harsh environment applications.

Q: Are all three parts RoHS3 compliant?

A: Yes. The TE Connectivity 8-2176093-4, Panasonic ERA-6AEB7682V, and Susumu RG2012P-7682-B-T5 are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: Can the primary part be substituted with either alternative, or are there application-specific constraints?

A: Substitution depends on application requirements. For non-automotive applications where 0.125W power dissipation is sufficient, either substitute is acceptable. For automotive applications, the Panasonic or Susumu parts are required due to AEC-Q200 qualification. For environments with sulfur contamination risk, the Susumu part with anti-sulfur coating is preferred.