TE Connectivity 8-2176088-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 8-2176088-0 is a 6.04 kOhms ±0.1% thin film chip resistor in 0603 (1608 Metric) package format, rated for 0.167W (1/6W) power dissipation. This component is part of the RP73P series manufactured by TE Connectivity Passive Product and is currently in active production status. The part is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1) and operates across the temperature range of -55°C to 155°C. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility for applications requiring this specific resistance value and tolerance specification.

Substiute Parts

8-2176088-0

TE Connectivity Passive ProductIn Stock: 17368-2176088-0 Datasheet

Current PartRFQ

RG1608P-6041-B-T5

SusumuIn Stock: 48904RG1608P-6041-B-T5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 8-2176088-0 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 6.04 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (minimum requirement)

Mechanical Parameters:

• Package format: 0603 (1608 Metric) (exact match required)
• Composition: Thin film (exact match required)
• Number of terminations: 2 (exact match required)

Compliance Parameters:

• RoHS3 compliance (required)
• MSL rating: 1 or better (required)

The substitute part RG1608P-6041-B-T5 from Susumu meets all critical electrical and mechanical parameters. The power rating difference (0.1W versus 0.167W) does not prevent substitution in applications where the original 0.167W rating is not fully utilized, as the substitute provides a lower power dissipation capability. The substitute includes additional automotive qualification (AEC-Q200) and anti-sulfur features, which represent enhancements to the base specification.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 8-2176088-0 is the primary component specification. This part is actively manufactured, RoHS3 compliant, and carries unlimited moisture sensitivity rating. Selection of this part is appropriate for applications where the full 0.167W power rating is required or where TE Connectivity sourcing is mandated by design or supply chain requirements.

Susumu RG1608P-6041-B-T5 serves as a direct electrical equivalent with identical resistance, tolerance, temperature coefficient, and operating temperature range. This substitute is suitable for applications where the lower 0.1W power rating is sufficient for the circuit design. The Susumu part includes AEC-Q200 automotive qualification and anti-sulfur features, making it appropriate for automotive and harsh environment applications. Both parts are active products with equivalent compliance status.

Selection between these parts should be based on power dissipation requirements of the specific application circuit and any supply chain or qualification constraints.

Frequently Asked Questions (FAQ)

Q: Can the Susumu RG1608P-6041-B-T5 be used as a direct replacement for the TE Connectivity 8-2176088-0?

A: The Susumu part is electrically equivalent in resistance value (6.04 kOhms), tolerance (±0.1%), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C to 155°C). Both parts use identical 0603 (1608 Metric) packaging and thin film composition. Substitution is valid provided the application circuit does not require the full 0.167W power rating of the original part, as the Susumu substitute is rated for 0.1W.

Q: What is the difference in power rating between these two parts?

A: The TE Connectivity 8-2176088-0 is rated for 0.167W (1/6W), while the Susumu RG1608P-6041-B-T5 is rated for 0.1W (1/10W). The substitute has a lower power dissipation capability. Substitution is appropriate only when the circuit design does not require power dissipation exceeding 0.1W at the resistor location.

Q: Are both parts RoHS3 compliant?

A: Yes, both the TE Connectivity 8-2176088-0 and Susumu RG1608P-6041-B-T5 are RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Q: What does AEC-Q200 qualification on the Susumi part indicate?

A: AEC-Q200 is an automotive industry qualification standard. The Susumu RG1608P-6041-B-T5 carries this certification, indicating suitability for automotive applications. The TE Connectivity part does not list this specific automotive qualification in the provided specifications.

Q: Are the physical dimensions identical between these parts?

A: Both parts use the 0603 (1608 Metric) package format. The TE Connectivity part has dimensions of 0.061" L x 0.031" W (1.55mm x 0.80mm) with maximum seated height of 0.022" (0.55mm). The Susumu part has dimensions of 0.063" L x 0.031" W (1.60mm x 0.80mm) with maximum seated height of 0.020" (0.50mm). These minor dimensional variations are within standard 0603 package tolerances and do not prevent PCB layout compatibility.

Q: Can these parts be used interchangeably in all applications?

A: Interchangeability is limited by power rating requirements. The Susumu substitute is suitable only for applications where power dissipation does not exceed 0.1W. For applications requiring the full 0.167W rating or where TE Connectivity sourcing is specified, the original part must be used.