3M 8215-8000 D-Sub Connector: Equivalent & Substitute Parts

Part Overview

The 3M 8215-8000 is a 15-position D-Sub plug connector with male pins, designed for panel mount applications using IDC (Insulation Displacement Contact) termination with ribbon cable. This connector is classified as active product status and is RoHS3 compliant. Alternative equivalent parts may be required due to inventory constraints, specific mounting configuration needs, or application-specific performance requirements such as higher current ratings or enhanced strain relief features.

Substiute Parts

8215-8000

3MIn Stock: 9028215-8000 Datasheet

Current PartRFQ

L117DAFRA15P

Amphenol ICC (Commercial Products)In Stock: 925L117DAFRA15P Datasheet

MFR RecommendedRFQ

L17DAFRA15PC309

Amphenol ICC (Commercial Products)In Stock: 1216L17DAFRA15PC309 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 3M 8215-8000 are qualified based on the following critical parameters that must remain constant:

• Connector Style & Type: D-Sub plug with male pins
• Position Count & Row Configuration: 15 positions, 2 rows
• Shell Size & Layout: Size 2 (DA, A)
• Termination Method: IDC with ribbon cable compatibility
• Shell Material & Finish: Steel with tin plating
• Contact Finish: Gold plating
• Flammability Rating: UL94 V-0
• Operating Temperature Range: -55°C ~ 105°C
• Compliance: RoHS3 compliant, MSL 1

The substitute parts identified (Amphenol ICC L117DAFRA15P and L17DAFRA15PC309) maintain these core electrical and mechanical parameters. Variations in mounting type (free hanging vs. panel mount), current rating, contact finish thickness, and strain relief features represent acceptable engineering trade-offs within the D-Sub 15-position connector category.

Parameter Comparison

Engineering Selection Recommendations

Both Amphenol ICC substitute parts maintain active product status and full RoHS compliance, ensuring long-term availability and regulatory alignment with the original 3M 8215-8000.

L117DAFRA15P Selection Criteria: This part is suitable for applications where the original panel mount configuration can be adapted to free hanging (in-line) installation. The reduced contact finish thickness (15.0µin vs. 30.0µin) is acceptable for standard signal applications. The higher current rating (3A vs. 1A) provides additional design margin. Strain relief features enhance mechanical durability in dynamic cable environments.

L17DAFRA15PC309 Selection Criteria: This part matches the contact finish thickness specification (30.0µin) of the original connector, providing equivalent contact durability. Like the L117DAFRA15P, it requires free hanging installation rather than panel mount. The 3A current rating and strain relief features offer performance enhancement over the original specification. RoHS compliance is confirmed.

Both substitutes are electrically and mechanically compatible with 15-position D-Sub ribbon cable IDC termination systems. Mounting configuration differences require mechanical redesign consideration during component selection.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC L117DAFRA15P or L17DAFRA15PC309 directly replace the 3M 8215-8000 in a panel mount application?

A: No. The substitute parts are configured for free hanging (in-line) installation, while the original 3M 8215-8000 is panel mount. Mechanical redesign of the mounting interface is required. The electrical and connector interface specifications remain compatible.

Q: What is the significance of the contact finish thickness difference between L117DAFRA15P (15.0µin) and the original 8215-8000 (30.0µin)?

A: Contact finish thickness affects long-term durability under repeated mating cycles and environmental exposure. The 15.0µin thickness on the L117DAFRA15P is within acceptable engineering tolerances for standard signal applications but provides less wear margin than the 30.0µin specification. The L17DAFRA15PC309 maintains the 30.0µin thickness for equivalent durability.

Q: Are the substitute parts compatible with the same ribbon cable IDC termination as the original 3M connector?

A: Yes. Both Amphenol ICC parts use IDC (Insulation Displacement Contact) termination with ribbon cable, maintaining full compatibility with existing cable assemblies and termination equipment.

Q: What is the impact of the higher current rating (3A) on the substitute parts compared to the original 1A rating?

A: The 3A rating on the Amphenol ICC substitutes represents enhanced current-carrying capacity. This is a performance improvement that does not affect backward compatibility. Applications designed for 1A operation remain fully supported.

Q: Do the substitute parts meet the same flammability and temperature specifications as the original?

A: Yes. Both Amphenol ICC L117DAFRA15P and L17DAFRA15PC309 maintain UL94 V-0 flammability rating and -55°C ~ 105°C operating temperature range, matching the original 3M 8215-8000 specifications.

Q: What is the difference between ROHS3 Compliant and RoHS Compliant status?

A: ROHS3 refers to the third iteration of the Restriction of Hazardous Substances directive with updated substance restrictions. Both designations confirm compliance with RoHS regulations. The L17DAFRA15PC309 listing shows "RoHS Compliant" status, which is acceptable for regulatory purposes.

Q: Are there packaging differences between the original and substitute parts?

A: Yes. The 3M 8215-8000 is supplied in bulk packaging, while both Amphenol ICC substitutes are supplied in tray packaging. This affects handling, storage, and inventory management but does not impact electrical or mechanical performance.