3M 82080-6000 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The 3M 82080-6000 is an 80-position rectangular receptacle connector designed for IDC (Insulation Displacement Contact) termination with ribbon cable. This connector features gold-plated female socket contacts rated for 30 AWG wire and is configured in a 2-row arrangement with 0.050" pitch spacing. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and component procurement.

Substiute Parts

82080-6000

3MIn Stock: 108882080-6000 Datasheet

Current PartRFQ

82080-6000RB

3MIn Stock: 121782080-6000RB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 82080-6000 is determined by strict equivalence across the following critical parameters:

• Connector configuration: 80-position receptacle with 2-row arrangement
• Contact geometry: 0.050" (1.27mm) pitch with 0.100" (2.54mm) row spacing
• Termination method: IDC compatibility with 30 AWG ribbon cable
• Electrical properties: Gold contact finish at 30.0µin (0.76µm) thickness
• Mechanical interface: Free hanging in-line mounting

The substitute part 82080-6000RB maintains identical electrical and mechanical specifications to the original part number, differing only in RoHS compliance status and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The 3M 82080-6000RB serves as a direct functional equivalent to the 82080-6000, with all electrical and mechanical parameters held to identical specifications. The primary distinction is RoHS compliance status: the substitute part meets RoHS requirements while the original does not.

Selection between these parts should be based on regulatory and procurement requirements:

• For RoHS-compliant applications: The 82080-6000RB is the appropriate choice, as it satisfies environmental compliance mandates while maintaining full electrical and mechanical compatibility.
• For legacy systems or non-regulated applications: Either part may be selected based on inventory availability and cost considerations.

Both parts carry identical MSL ratings, ECCN classifications, and HTSUS codes, indicating equivalent handling, export, and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can the 82080-6000RB be used as a direct replacement for the 82080-6000?

A: Yes. The 82080-6000RB maintains identical contact geometry, pitch spacing, termination method, and electrical properties. Physical and functional interchangeability is complete.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. The 82080-6000RB is RoHS compliant; the 82080-6000 is not. All other specifications—connector configuration, contact finish, wire gauge compatibility, and mounting type—are identical.

Q: Are there any compatibility concerns when substituting one part for the other?

A: No compatibility concerns exist. Both parts are configured for IDC termination with 30 AWG ribbon cable, feature identical pitch and row spacing, and use the same gold contact finish thickness. Mating connectors and cable assemblies designed for one part will function identically with the other.

Q: Why is the original part marked as obsolete?

A: Product obsolescence typically reflects manufacturer discontinuation decisions. The availability of the RoHS-compliant variant (82080-6000RB) may have contributed to this status. Current procurement should prioritize the substitute part.

Q: Does the MSL rating differ between these parts?

A: No. Both parts carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.