3M 82036-6006 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The 3M 82036-6006 is a 36-position rectangular receptacle connector designed for IDC (Insulation Displacement Contact) termination with ribbon cable. This connector features gold-plated female socket contacts rated for 30 AWG wire and includes feed-through and strain relief features. The part is classified as obsolete, making identification of equivalent substitute parts essential for system maintenance, repair, and component sourcing in legacy applications.

Substiute Parts

82036-6006

3MIn Stock: 68282036-6006 Datasheet

Current PartRFQ

82036-6006RB

3MIn Stock: 95582036-6006RB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M 82036-6006 is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Contact type (Female Socket)
• Number of positions (36)
• Pitch spacing (0.050" / 1.27mm)
• Row configuration (2 rows at 0.100" / 2.54mm spacing)
• Cable termination method (IDC)
• Wire gauge compatibility (30 AWG)
• Contact finish specification (Gold at 30.0µin thickness)
• Mechanical features (Feed Through, Strain Relief)
• Mounting configuration (Free Hanging In-Line)

The 3M 82036-6006RB meets all these criteria and qualifies as a direct substitute. Both parts share identical electrical and mechanical specifications, with the primary distinction being RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

The 3M 82036-6006RB is a direct functional equivalent to the 82036-6006. Both parts are classified as obsolete and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction between these parts is regulatory compliance: the 82036-6006RB carries RoHS compliance certification, while the original 82036-6006 does not. For applications subject to RoHS requirements or environmental regulations, the 82036-6006RB is the appropriate selection. For legacy systems with no RoHS mandate, either part is electrically and mechanically interchangeable.

Both parts carry MSL Level 1 (Unlimited) moisture sensitivity rating and are classified under ECCN EAR99 for export control purposes.

Frequently Asked Questions (FAQ)

Q: Can the 82036-6006RB replace the 82036-6006 in existing assemblies?

A: Yes. The 82036-6006RB is electrically and mechanically identical to the 82036-6006. All contact positions, pitch spacing, termination method, wire gauge compatibility, and mechanical features are equivalent. Direct substitution is possible without circuit or mechanical redesign.

Q: What is the difference between these two part numbers?

A: The 82036-6006RB is RoHS compliant, while the 82036-6006 is not. All other specifications—connector type, position count, pitch, row spacing, contact finish, wire gauge, and mechanical features—are identical.

Q: Are there any compatibility concerns when substituting the 82036-6006RB for the 82036-6006?

A: No compatibility concerns exist. Both parts are 36-position IDC receptacles with identical pitch (0.050"), row spacing (0.100"), and gold contact finish. They are designed for the same ribbon cable gauge (30 AWG) and mounting configuration.

Q: Why are both parts classified as obsolete?

A: Obsolete status indicates these parts are no longer in active production by the manufacturer. Availability is limited to existing inventory. For new designs, current-generation rectangular connector alternatives should be evaluated.

Q: What is the significance of the contact finish thickness specification?

A: The 30.0µin (0.76µm) gold plating thickness ensures consistent electrical contact resistance and corrosion protection across all 36 contact positions. This specification must be maintained for functional equivalence.

Q: Can these connectors be used with wire gauges other than 30 AWG?

A: No. These connectors are specified for 30 AWG ribbon cable only. The IDC termination mechanism and contact geometry are designed for this specific wire gauge. Using different gauges will result in improper termination and electrical failure.