TE Connectivity 8-1415535-6 General Purpose Relay SPDT 16A 12V Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield 8-1415535-6 is a general purpose relay with SPDT (Single Pole Double Throw) contact configuration rated for 16A at 12VDC coil voltage. This through-hole mounted relay features sealed flux protection and is designed for industrial control applications requiring reliable switching of AC and DC loads.

The 8-1415535-6 is classified as obsolete. Equivalent and substitute parts are available from TE Connectivity and alternative manufacturers to maintain design continuity and ensure supply chain availability for applications currently utilizing this relay.

Substiute Parts

8-1415535-6

TE Connectivity Potter & Brumfield RelaysIn Stock: 32138-1415535-6 Datasheet

Current PartRFQ

1-1393240-1

TE Connectivity Potter & Brumfield RelaysIn Stock: 39201-1393240-1 Datasheet

Parametric EquivalentRFQ

7-1415899-7

TE Connectivity Potter & Brumfield RelaysIn Stock: 339487-1415899-7 Datasheet

Parametric EquivalentRFQ

RT314012

TE Connectivity Potter & Brumfield RelaysIn Stock: 16004RT314012 Datasheet

Parametric EquivalentRFQ

G2RL-1-E DC12

Omron Electronics Inc-EMC DivIn Stock: 12318G2RL-1-E DC12 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 8-1415535-6 is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Compatibility Criteria:

• Coil voltage: 12VDC
• Contact form: SPDT (1 Form C)
• Contact current rating: 16 A minimum
• Coil current: 33.3 mA
• Coil resistance: 360 Ohms
• Must operate voltage: 8.4 VDC
• Must release voltage: 1.2 VDC

Mechanical Compatibility Criteria:

• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -40°C ~ 85°C minimum
• Seal rating: Sealed - Flux Protection

Regulatory Compliance Criteria:

• RoHS3 Compliant
• ECCN: EAR99

Substitute parts are classified into two categories: parametric equivalents (identical electrical and mechanical specifications) and similar parts (functionally compatible with minor specification variations).

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalents (Direct Substitutes):

The parts 1-1393240-1, 7-1415899-7, and RT314012 are parametric equivalents to the 8-1415535-6. All three parts maintain identical electrical specifications, mechanical configuration, and regulatory compliance. These parts are classified as active products and are suitable for direct replacement in applications currently using the obsolete 8-1415535-6.

Similar Part (Functional Alternative):

The Omron G2RL-1-E DC12 is a functionally compatible alternative. This part meets all critical electrical and mechanical requirements with the following distinctions: operate time is 15 ms (versus 8 ms for the TE Connectivity parts), release time is 5 ms (versus 6 ms), and switching voltage rating extends to 440VAC and 300VDC (versus 400VAC maximum). The contact material is Silver Alloy, Cadmium Free rather than Silver Nickel. This part is suitable for applications where the extended switching voltage rating and alternative contact material are acceptable.

Product Status Consideration:

All substitute parts are classified as active products with current manufacturing and distribution support. The 8-1415535-6 is obsolete and should be replaced with one of the active alternatives for new designs or long-term supply assurance.

Frequently Asked Questions (FAQ)

Q: Can the 1-1393240-1 be used as a direct replacement for the 8-1415535-6?

A: Yes. The 1-1393240-1 is a parametric equivalent with identical coil voltage (12VDC), contact form (SPDT), current rating (16A), coil current (33.3 mA), operating temperature range (-40°C ~ 85°C), and mechanical configuration (through-hole PC pin termination). Both parts are sealed with flux protection and meet ROHS3 compliance.

Q: What is the difference between the 7-1415899-7 and the RT314012?

A: Both parts are parametric equivalents to the 8-1415535-6 with identical electrical and mechanical specifications. The primary difference is the relay series designation: 7-1415899-7 is part of the RZ series, while RT314012 is part of the RT1 series. Both are manufactured by TE Connectivity Potter & Brumfield and are suitable for direct substitution.

Q: Can the Omron G2RL-1-E DC12 replace the TE Connectivity 8-1415535-6?

A: The Omron G2RL-1-E DC12 is functionally compatible for applications requiring 12VDC coil voltage, SPDT contact form, and 16A current rating. The operate time is 15 ms compared to 8 ms for the TE Connectivity part. The switching voltage rating is higher (440VAC, 300VDC). Applications sensitive to switching speed or requiring the specific 400VAC maximum rating should use the TE Connectivity parametric equivalents instead.

Q: Are all substitute parts through-hole mounted with PC pin termination?

A: Yes. All substitute parts listed (1-1393240-1, 7-1415899-7, RT314012, and G2RL-1-E DC12) are through-hole mounted with PC pin termination, matching the mechanical configuration of the 8-1415535-6.

Q: What is the coil resistance for all substitute parts?

A: All substitute parts have a coil resistance of 360 Ohms, identical to the 8-1415535-6. This ensures equivalent electrical loading on the control circuit.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts are RoHS3 compliant and classified as ECCN EAR99, matching the regulatory status of the 8-1415535-6.

Q: What is the operating temperature range for the substitute parts?

A: All substitute parts operate across the temperature range of -40°C to 85°C, identical to the 8-1415535-6.

Q: Why is the 8-1415535-6 listed as obsolete?

A: The 8-1415535-6 is no longer in active production. The parametric equivalents 1-1393240-1, 7-1415899-7, and RT314012 are active products that provide identical functionality and are recommended for new designs and replacement applications.