TE Connectivity AMP Connectors 8-102898-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 8-102898-8 is an active rectangular connector header designed for through-hole mounting applications. This unshrouded, 5-position connector operates at 0.100" (2.54mm) pitch and supports board-to-board or cable interconnection with press-fit and solder termination options. The connector is RoHS compliant and rated for -55°C to 125°C operation with a 3A current capacity per contact. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

8-102898-8

TE Connectivity AMP ConnectorsIn Stock: 10268-102898-8 Datasheet

Current PartRFQ

93689-106-05LF

Amphenol ICC (FCI)In Stock: 154393689-106-05LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector headers is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Pitch - Mating: 0.100" (2.54mm) — determines mechanical mating with receptacles
• Number of Positions: 5 — defines circuit count
• Contact Type: Male Pin — specifies mating interface
• Current Rating: 3A per contact — ensures power delivery capability
• Operating Temperature Range: Must encompass or equal the primary part range

Mechanical Compatibility Parameters:

• Mounting Type: Through Hole — determines PCB assembly method
• Termination: Press-Fit, Solder — specifies connection to PCB
• Fastening Type: Push-Pull — defines mating mechanism
• Shrouding: Unshrouded — establishes form factor
• Number of Rows: 1 — defines physical layout

Compliance Parameters:

• RoHS Compliance: Required for regulatory equivalence
• Material Flammability Rating: UL94 V-0 — ensures safety certification alignment
• Moisture Sensitivity Level: 1 (Unlimited) — confirms handling and storage compatibility

The substitute part 93689-106-05LF meets all critical electrical and mechanical parameters for direct substitution with the primary part 8-102898-8.

Parameter Comparison

Engineering Selection Recommendations

Both the primary part 8-102898-8 and the substitute part 93689-106-05LF are active products with equivalent electrical and mechanical specifications for 5-position, 0.100" pitch header applications. Both parts maintain RoHS compliance and UL94 V-0 flammability certification, ensuring regulatory alignment across applications.

The substitute part 93689-106-05LF offers an extended operating temperature range of -65°C to 125°C compared to the primary part's -55°C to 125°C range, providing additional thermal margin for applications requiring lower temperature operation. The substitute part utilizes phosphor bronze contact material with GXT™ gold plating on the mating surface, compared to the primary part's copper alloy with standard gold plating. Both contact material compositions and finish specifications support equivalent electrical performance and reliability in standard through-hole applications.

Selection between these parts should be based on inventory availability, lead time requirements, and packaging preferences. The primary part is supplied in tray packaging, while the substitute part is supplied in bag packaging. Both parts support identical termination methods (press-fit and solder) and mounting configurations, enabling direct substitution at the PCB assembly level.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 93689-106-05LF directly replace the TE Connectivity 8-102898-8 in existing designs?

A: Yes. Both parts share identical pitch (0.100"), position count (5), contact type (male pin), mounting method (through hole), and termination options (press-fit and solder). The electrical and mechanical interfaces are equivalent, enabling direct substitution without design modification.

Q: What is the difference in contact material between these two parts?

A: The primary part 8-102898-8 uses copper alloy contacts, while the substitute part 93689-106-05LF uses phosphor bronze contacts. Both materials provide equivalent electrical conductivity and reliability for standard applications. Phosphor bronze offers enhanced spring characteristics and wear resistance in high-cycle mating applications.

Q: Does the extended operating temperature range of the substitute part affect compatibility?

A: No. The substitute part's operating range of -65°C to 125°C encompasses the primary part's range of -55°C to 125°C. The extended lower temperature capability does not affect compatibility and may provide additional margin for applications requiring operation below -55°C.

Q: Are there packaging differences between these parts?

A: Yes. The primary part 8-102898-8 is supplied in tray packaging, while the substitute part 93689-106-05LF is supplied in bag packaging. Both packaging formats are suitable for automated PCB assembly processes. Packaging selection should be based on assembly line requirements and inventory management practices.

Q: What is the significance of the GXT™ gold plating on the substitute part?

A: GXT™ is Amphenol ICC's proprietary gold plating specification. It provides equivalent mating surface performance to standard gold plating while offering enhanced corrosion resistance and contact reliability. This specification does not affect electrical or mechanical compatibility with standard gold-plated receptacles.

Q: Are both parts RoHS compliant?

A: Yes. Both the primary part 8-102898-8 and the substitute part 93689-106-05LF are RoHS compliant and carry UL94 V-0 flammability certification. Both parts meet current regulatory requirements for lead-free and halogen-free applications.

Q: What is the Moisture Sensitivity Level (MSL) for both parts?

A: Both parts carry MSL 1 (Unlimited), indicating unlimited shelf life without special moisture control measures. No desiccant storage or baking procedures are required prior to assembly.

Q: Can these connectors be used interchangeably with different receptacle manufacturers?

A: Yes. Both parts conform to the 0.100" (2.54mm) pitch standard for rectangular connectors. They are compatible with receptacles from any manufacturer that adheres to this industry standard pitch specification.