TE Connectivity 805-0050 Accelerometer Equivalent & Substitute Parts

Part Overview

The TE Connectivity Measurement Specialties 805-0050 is an analog motion sensor accelerometer designed for Z-axis acceleration measurement. This IEPE output accelerometer operates across a ±50g range with a bandwidth of 0.3Hz to 10kHz and is housed in a TO-5-3 metal can package. The device is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications are maintained across alternative part numbers from the same manufacturer.

Substiute Parts

805-0050

TE Connectivity Measurement SpecialtiesIn Stock: 1077805-0050 Datasheet

Current PartRFQ

805-0050-01

TE Connectivity Measurement SpecialtiesIn Stock: 1113805-0050-01 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 805-0050 accelerometer is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Acceleration range: ±50g
• Output type: IEPE
• Sensitivity: 100 mV/g
• Bandwidth: 0.3Hz ~ 10kHz
• Supply voltage: 18V ~ 30V
• Measurement axis: Z Axis

Mechanical Parameters:

• Package type: TO-5-3 Metal Can
• Physical form factor compatibility

Compliance Parameters:

• RoHS3 compliance status
• Moisture sensitivity level: 1 (Unlimited)
• Active product status

The substitute part 805-0050-01 maintains identical electrical specifications and compliance certifications. The primary difference is the mounting type, which transitions from Adhesive to Through Hole configuration. This distinction does not affect electrical performance or functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the 805-0050 and 805-0050-01 are Active status products manufactured by TE Connectivity Measurement Specialties and maintain full RoHS3 compliance. Selection between these parts is determined by mounting methodology requirements within the application circuit design.

805-0050 (Adhesive Mounting): Select this part number when the application design specifies surface-mount adhesive attachment to the measurement surface or circuit substrate.

805-0050-01 (Through Hole Mounting): Select this part number when the application design requires through-hole lead insertion and solder connection to the printed circuit board.

Both parts deliver identical electrical performance, frequency response, sensitivity, and temperature operating range. The choice between them is purely a mechanical integration decision based on the host system's mounting architecture and assembly process requirements.

Frequently Asked Questions (FAQ)

Q: Can 805-0050-01 be used as a direct replacement for 805-0050?

A: Electrical and functional equivalence is complete. The substitute part maintains identical acceleration range, IEPE output, sensitivity, bandwidth, and supply voltage specifications. The difference is mounting type: adhesive versus through-hole. Substitution is valid only if the application's mechanical mounting design accommodates through-hole installation.

Q: What is the primary difference between these two part numbers?

A: The 805-0050 uses adhesive mounting, while the 805-0050-01 uses through-hole mounting. All electrical parameters, performance characteristics, and compliance certifications are identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both 805-0050 and 805-0050-01 are RoHS3 compliant with identical moisture sensitivity levels (MSL 1, Unlimited).

Q: Do these accelerometers have the same sensitivity specification?

A: Yes. Both parts deliver 100 mV/g sensitivity across the ±50g measurement range with 0.3Hz to 10kHz bandwidth.

Q: What supply voltage range is required for both parts?

A: Both the 805-0050 and 805-0050-01 require 18V to 30V supply voltage for IEPE output operation.

Q: Can mounting type be changed after component selection?

A: No. The mounting type is a fixed mechanical characteristic of each part number. Selection must occur during design phase based on the application's mounting requirements.

Q: Are there inventory differences between these parts?

A: Yes. The 805-0050 has 1007 pieces in stock, while the 805-0050-01 has 1101 pieces in stock. Both are available as new original components in bulk packaging.