Coto Technology 8002-05-01 Reed Relay DPST 500mA 5V Equivalent & Substitute Parts

Part Overview

The Coto Technology 8002-05-01 is a through-hole mounted reed relay with DPST-NO (2 Form A) contact configuration, rated for 500 mA at 200VAC/200VDC maximum switching voltage. The relay operates on 5VDC coil voltage with integrated diode protection and non-latching coil type. This component is classified as obsolete product status, necessitating identification of active equivalent alternatives to ensure continued design support and procurement availability.

Substiute Parts

8002-05-01

Coto TechnologyIn Stock: 7598002-05-01 Datasheet

Current PartRFQ

8L02-05-01

Coto TechnologyIn Stock: 75418L02-05-01 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Coto Technology 8L02-05-01 qualifies as a direct substitute for the 8002-05-01 based on electrical and mechanical parameter equivalence. Substitution is valid when the following critical parameters match:

• Coil voltage: 5VDC
• Contact form: DPST-NO (2 Form A)
• Contact rating: 500 mA
• Switching voltage: 200VAC, 200VDC maximum
• Coil current: 25 mA
• Coil type: Non Latching
• Integrated diode feature
• Through-hole mounting with PC pin termination
• Operating temperature range: -20°C ~ 85°C
• Coil resistance: 200 Ohms

The 8L02-05-01 maintains full electrical and mechanical compatibility with the obsolete 8002-05-01, with the primary distinction being active product status and improved release time performance.

Parameter Comparison

Engineering Selection Recommendations

The Coto Technology 8L02-05-01 is the direct equivalent for the obsolete 8002-05-01. Selection of the 8L02-05-01 is based on the following engineering criteria:

Product Status: The 8L02-05-01 maintains active product status, ensuring long-term availability and continued manufacturing support. The 8002-05-01 is classified as obsolete, limiting procurement options and future supply chain reliability.

Regulatory Compliance: Both parts maintain REACH Unaffected status and EAR99 export classification. The 8L02-05-01 carries ROHS3 Compliant certification, representing current regulatory alignment compared to the RoHS Compliant designation of the 8002-05-01.

Electrical Equivalence: All critical electrical parameters are identical, including coil voltage, contact rating, switching voltage, coil current, and coil resistance. The 8L02-05-01 demonstrates improved release time performance (0.5 ms versus 1 ms), providing enhanced switching response characteristics.

Mechanical Compatibility: Both parts utilize identical through-hole mounting with PC pin termination, ensuring direct PCB footprint compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can the 8L02-05-01 be used as a direct replacement for the 8002-05-01 without circuit modification?

A: Yes. The 8L02-05-01 maintains identical electrical specifications and mechanical mounting configuration. No circuit modification is required for substitution.

Q: What is the primary difference between the 8002-05-01 and 8L02-05-01?

A: The 8L02-05-01 is the active production equivalent with improved release time (0.5 ms versus 1 ms) and current regulatory compliance status. The 8002-05-01 is obsolete.

Q: Are there packaging differences between these parts?

A: The 8002-05-01 uses standard packaging, while the 8L02-05-01 is supplied in tube packaging. Both maintain identical electrical and mechanical specifications.

Q: Do both parts meet current environmental and export regulations?

A: Yes. Both parts are REACH Unaffected and classified as EAR99 for export purposes. The 8L02-05-01 carries ROHS3 Compliant certification for current regulatory alignment.

Q: What is the coil resistance specification for both parts?

A: Both the 8002-05-01 and 8L02-05-01 have a coil resistance of 200 Ohms at 5VDC.

Q: Are the operating temperature ranges identical?

A: Yes. Both parts operate across the temperature range of -20°C to 85°C.

Q: What is the contact current rating for these relays?

A: Both parts are rated for 500 mA maximum contact current at 200VAC or 200VDC switching voltage.