7W-10.000MBE-T CMOS Oscillator Equivalent & Substitute Parts

Part Overview

The 7W-10.000MBE-T is a 10 MHz XO (Standard) CMOS oscillator manufactured by TXC CORPORATION, designed for applications requiring crystal-based frequency generation with enable/disable functionality. This component operates at 3.3V supply voltage and is housed in a 4-SMD, No Lead surface mount package with dimensions of 7.00mm x 5.00mm.

The 7W-10.000MBE-T carries an Obsolete product status. Identification of functionally equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for systems utilizing this oscillator.

Substiute Parts

7W-10.000MBE-T

TXC CORPORATIONIn Stock: 20377W-10.000MBE-T Datasheet

Current PartRFQ

510CAA10M0000AAGR

Skyworks Solutions Inc.In Stock: 681510CAA10M0000AAGR Datasheet

DirectRFQ

CPPC7L-A7BP-10.0000TS

Cardinal Components Inc.In Stock: 675CPPC7L-A7BP-10.0000TS Datasheet

DirectRFQ

CPPC7LZ-A7BP-10.0TS

Cardinal Components Inc.In Stock: 965CPPC7LZ-A7BP-10.0TS Datasheet

DirectRFQ

SXO75C3A481-10.000M

Suntsu Electronics, Inc.In Stock: 3336SXO75C3A481-10.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7W-10.000MBE-T is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Frequency: 10 MHz
• Output Type: CMOS
• Supply Voltage: 3.3V
• Function: Enable/Disable
• Frequency Stability: ±50ppm
• Operating Temperature Range: -40°C ~ 85°C
• Package Type: 4-SMD, No Lead
• Package Dimensions: 7.00mm x 5.00mm
• Mounting Type: Surface Mount
• Base Resonator: Crystal

All four substitute parts listed below satisfy these mandatory parameters. Variations in maximum supply current, disable current, seated height, and packaging format (Cut Tape versus Tape & Reel) do not affect functional substitution capability within the specified electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute Candidates:

The 510CAA10M0000AAGR (Skyworks Solutions Inc., Si510 series) and both Cardinal Components FIPO™ CPP variants (CPPC7L-A7BP-10.0000TS and CPPC7LZ-A7BP-10.0TS) are active production parts with full compliance certifications. These three options provide immediate supply availability and long-term product lifecycle support.

The SXO75C3A481-10.000M (Suntsu Electronics, SXO75C series) is an active production part offering the lowest maximum supply current (16mA) among all substitutes, making it suitable for power-constrained applications.

Compliance Considerations:

All substitute parts maintain RoHS3 compliance and REACH Unaffected status. The 7W-10.000MBE-T carries RoHS Compliant designation. All parts share identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Packaging and Inventory:

The 510CAA10M0000AAGR is supplied in Tape & Reel format with 671 units in stock. The CPPC7LZ-A7BP-10.0TS offers the highest inventory availability at 863 units. The SXO75C3A481-10.000M is available in Bulk packaging with 3,259 units in stock. The original 7W-10.000MBE-T is available in Cut Tape format with 1,988 units remaining.

Height Clearance:

Applications with strict PCB height constraints should prioritize the 7W-10.000MBE-T (1.42mm seated height) or SXO75C3A481-10.000M (1.60mm seated height). The Skyworks and Cardinal parts reach 1.80mm and 1.90mm respectively.

Frequently Asked Questions (FAQ)

Q: Can the 510CAA10M0000AAGR directly replace the 7W-10.000MBE-T in existing designs?

A: Yes. Both parts share identical electrical specifications (10 MHz, CMOS output, 3.3V supply, ±50ppm stability, -40°C to 85°C operation) and package footprint (7.00mm x 5.00mm, 4-SMD No Lead). The 510CAA10M0000AAGR has a maximum seated height of 1.80mm compared to 1.42mm for the original part. Verify PCB clearance if height-constrained.

Q: What is the difference between the two Cardinal Components parts?

A: The CPPC7L-A7BP-10.0000TS and CPPC7LZ-A7BP-10.0TS are both FIPO™ CPP series oscillators with identical electrical and mechanical specifications. Both operate at 10 MHz with 3.3V supply and ±50ppm stability. The primary distinction is part number designation; both are functionally equivalent for this application.

Q: Which substitute offers the best power efficiency?

A: The SXO75C3A481-10.000M (Suntsu) specifies a maximum supply current of 16mA, the lowest among all options. The original 7W-10.000MBE-T draws 20mA maximum, while the Skyworks part draws 26mA and Cardinal parts draw 25mA maximum.

Q: Are all substitutes available in the same packaging format?

A: No. The original 7W-10.000MBE-T is supplied in Cut Tape (CT) format. The Skyworks 510CAA10M0000AAGR and both Cardinal parts are supplied in Tape & Reel (TR) format. The Suntsu SXO75C3A481-10.000M is supplied in Bulk format. Packaging format does not affect electrical or mechanical compatibility.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the original 7W-10.000MBE-T and all four substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions.

Q: Can I use these substitutes in new designs, or only as replacements?

A: All four substitute parts carry Active product status and are suitable for both new designs and replacement applications. The original 7W-10.000MBE-T is Obsolete and should not be specified for new designs.