7V-24.000MAKV-T Crystal Oscillator Equivalent & Substitute Parts

Part Overview

The 7V-24.000MAKV-T is a 24 MHz surface mount crystal oscillator manufactured by TXC CORPORATION. This active product operates at a fundamental frequency with ±30ppm tolerance and 8pF load capacitance, designed for applications requiring precise timing in the 24 MHz band. The part is RoHS compliant and carries MSL 1 rating, indicating unlimited moisture sensitivity protection. Substitute parts are identified when design requirements permit variations in specific electrical or mechanical parameters while maintaining core frequency and functional specifications.

Substiute Parts

7V-24.000MAKV-T

TXC CORPORATIONIn Stock: 25287V-24.000MAKV-T Datasheet

Current PartRFQ

8Z-24.000MAKV-T

TXC CORPORATIONIn Stock: 13788Z-24.000MAKV-T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7V-24.000MAKV-T is determined by the following critical parameters:

Mandatory Match Parameters:

• Frequency: 24.0000 MHz (exact)
• Frequency Tolerance: ±30 ppm (exact)
• Load Capacitance: 8 pF (exact)
• Operating Mode: Fundamental (exact)
• Operating Temperature Range: -40°C to 125°C (exact)
• Package Type: 4-SMD, No Lead (exact)
• RoHS Status: Compliant (exact)
• MSL Rating: 1 (exact)

Allowable Variation Parameters:

• ESR (Equivalent Series Resistance): May vary within acceptable circuit design margins
• Physical Dimensions: May vary within PCB layout constraints
• Manufacturer Series Designation: May differ between manufacturers or product lines

The substitute part 8Z-24.000MAKV-T meets all mandatory match parameters. The primary difference is ESR specification (100 Ohms versus 60 Ohms) and physical dimensions, which represent allowable variations for equivalent functionality in most applications.

Parameter Comparison

Engineering Selection Recommendations

7V-24.000MAKV-T Selection Criteria:

• Applications requiring 60 Ohms ESR specification
• PCB layouts with space allocation for 3.20 x 2.50 mm footprint
• Designs where lower ESR is a circuit requirement

8Z-24.000MAKV-T Selection Criteria:

• Applications where 100 Ohms ESR is acceptable
• Space-constrained PCB designs benefiting from 2.50 x 2.00 mm smaller footprint
• Applications requiring lower profile components (0.55 mm maximum height)
• Designs where ESR variation does not impact circuit performance

Both parts carry identical RoHS compliance, REACH unaffected status, and MSL 1 rating. Both are active products from TXC CORPORATION with full inventory availability. Selection between these parts depends on circuit ESR requirements and PCB layout constraints rather than functional or compliance differences.

Frequently Asked Questions (FAQ)

Q: Can 8Z-24.000MAKV-T replace 7V-24.000MAKV-T in any application?

A: Substitution is valid when the circuit design accommodates 100 Ohms ESR and the PCB layout permits the smaller 2.50 x 2.00 mm footprint. The higher ESR of the 8Z series may affect oscillator startup characteristics in some designs; circuit validation is necessary for critical applications.

Q: What is the significance of the ESR difference between these parts?

A: ESR (Equivalent Series Resistance) affects oscillator startup time and power consumption. The 7V-24.000MAKV-T at 60 Ohms provides lower resistance, while the 8Z-24.000MAKV-T at 100 Ohms has higher resistance. Both values are within standard crystal specifications for 24 MHz fundamental mode operation.

Q: Are the physical dimension differences critical?

A: Physical dimensions are critical only for PCB layout compatibility. The 8Z-24.000MAKV-T offers a smaller footprint (2.50 x 2.00 mm versus 3.20 x 2.50 mm) and lower profile (0.55 mm versus 0.90 mm), making it suitable for space-constrained designs. Verify PCB pad layout before substitution.

Q: Do both parts have identical frequency specifications?

A: Yes. Both parts operate at 24.0000 MHz with ±30 ppm tolerance and ±60 ppm stability. Frequency performance is identical between the two parts.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS compliant, REACH unaffected, and carry MSL 1 (unlimited moisture sensitivity) rating. Both are classified under ECCN EAR99 and HTSUS 8541.60.0060.