7M-32.000MEEV-T Equivalent & Substitute Parts

Part Overview

The 7M-32.000MEEV-T is a 32 MHz fundamental mode quartz crystal manufactured by TXC CORPORATION. This surface mount device is specified for 8pF load capacitance with 50 Ohms equivalent series resistance, packaged in a 4-SMD, No Lead configuration measuring 3.20mm x 2.50mm. The part maintains Active product status and is suitable for applications requiring stable frequency reference in the 32 MHz range with ±10ppm tolerance. Substitute parts are identified when inventory constraints, lead time requirements, or supply chain considerations necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

7M-32.000MEEV-T

TXC CORPORATIONIn Stock: 11007M-32.000MEEV-T Datasheet

Current PartRFQ

RH100-32.000-8-F-1010-TR

Raltron ElectronicsIn Stock: 3077RH100-32.000-8-F-1010-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7M-32.000MEEV-T is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Frequency: 32 MHz (exact match required)
• Frequency Stability: ±10ppm (exact match required)
• Load Capacitance: 8pF (exact match required)
• ESR: 50 Ohms (exact match required)
• Operating Mode: Fundamental (exact match required)
• Operating Temperature Range: -20°C to 70°C (minimum required)
• Package / Case: 4-SMD, No Lead (exact match required)
• Size / Dimension: 3.20mm x 2.50mm (exact match required)
• Height - Seated (Max): 0.80mm (exact match required)

The RH100-32.000-8-F-1010-TR manufactured by Raltron Electronics satisfies all mandatory matching parameters and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the 7M-32.000MEEV-T and RH100-32.000-8-F-1010-TR maintain Active product status, indicating ongoing manufacturer support and availability. The RH100-32.000-8-F-1010-TR provides additional compliance documentation including RoHS3 Compliance, REACH Unaffected status, and Moisture Sensitivity Level (MSL) 1 classification. Both parts share identical electrical specifications, mechanical dimensions, and regulatory classifications (ECCN EAR99, HTSUS 8541.60.0060). Selection between these parts should be based on inventory availability, lead time requirements, and supply chain logistics rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the RH100-32.000-8-F-1010-TR be used as a direct replacement for the 7M-32.000MEEV-T?

A: Yes. The RH100-32.000-8-F-1010-TR is a parametric equivalent substitute. All critical electrical parameters (frequency, stability, load capacitance, ESR), operating characteristics (temperature range, operating mode), and mechanical specifications (package type, dimensions, height) are identical.

Q: Are there any differences in compliance or certifications between these parts?

A: Both parts carry identical ECCN (EAR99) and HTSUS (8541.60.0060) classifications. The RH100-32.000-8-F-1010-TR provides explicit RoHS3 Compliance and REACH Unaffected documentation. Both are classified as MSL 1 or equivalent for moisture sensitivity.

Q: What is the significance of the 4-SMD, No Lead package specification?

A: This package designation indicates a surface mount crystal with four solder pads and no through-hole leads. Both substitute parts use identical package geometry, ensuring compatibility with existing PCB layouts and reflow soldering processes.

Q: Does frequency tolerance differ between these parts?

A: No. Both the 7M-32.000MEEV-T and RH100-32.000-8-F-1010-TR specify ±10ppm frequency tolerance and ±10ppm frequency stability, ensuring equivalent performance in frequency-critical applications.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 3.20mm x 2.50mm with a maximum seated height of 0.80mm, confirming mechanical interchangeability in surface mount applications.