TE Connectivity AMP Connectors 794613-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 794613-3 is a stamped pin contact for the Micro MATE-N-LOK rectangular connector series. This component is designed for crimp termination on wire gauges 26-30 AWG with gold plating for enhanced conductivity and corrosion resistance. The part is currently active in production status with 1076 pieces available in new original inventory. Substitute parts are identified to address packaging variations, compliance requirements, and inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

794613-3

TE Connectivity AMP ConnectorsIn Stock: 1149794613-3 Datasheet

Current PartRFQ

1-794613-2

TE Connectivity AMP ConnectorsIn Stock: 89001-794613-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 794613-3 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Series: Micro MATE-N-LOK
• Type: Stamped
• Pin or Socket: Pin
• Contact Termination: Crimp
• Wire Gauge: 26-30 AWG
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters (Non-Critical for Substitution):

• Packaging configuration
• RoHS compliance status
• Inventory quantity

The substitute part 1-794613-2 maintains complete electrical and mechanical compatibility with the main part number while differing in packaging format and regulatory compliance classification.

Parameter Comparison

Engineering Selection Recommendations

794613-3 Selection Criteria:

• Use when non-RoHS compliant components are acceptable for the application
• Suitable for legacy system designs or applications without RoHS requirements
• Current inventory availability: 1076 pieces

1-794613-2 Selection Criteria:

• Use when ROHS3 compliance is required by design specification or regulatory mandate
• Suitable for new product designs subject to RoHS Directive 2011/65/EU
• Bulk packaging format accommodates high-volume production requirements
• Current inventory availability: 8873 pieces

Both parts deliver identical electrical performance and mechanical fit within Micro MATE-N-LOK connector assemblies. Selection between these parts is determined by regulatory compliance requirements and packaging needs rather than functional capability.

Frequently Asked Questions (FAQ)

Q: Can 1-794613-2 be used as a direct replacement for 794613-3 in existing assemblies?

A: Yes. Both parts are functionally and mechanically equivalent. The substitute part maintains identical wire gauge compatibility (26-30 AWG), contact termination method (crimp), contact finish (gold at 30.0µin thickness), and series designation (Micro MATE-N-LOK). Substitution is valid from an engineering standpoint.

Q: What is the primary difference between these two part numbers?

A: The primary differences are packaging format and RoHS compliance status. Part 1-794613-2 is supplied in bulk packaging and meets ROHS3 compliance, while 794613-3 does not specify RoHS compliance. All electrical and mechanical specifications are identical.

Q: Does the RoHS compliance difference affect performance in the connector assembly?

A: No. RoHS compliance relates to material composition and manufacturing process restrictions, not electrical or mechanical performance. Both parts perform identically within Micro MATE-N-LOK assemblies.

Q: Are there any wire gauge limitations when substituting between these parts?

A: No. Both parts support identical wire gauge specifications of 26-30 AWG. Crimp termination compatibility is maintained across the full gauge range for both part numbers.

Q: Which part should be selected for new product designs?

A: Selection depends on regulatory requirements. If RoHS compliance is mandated by design specification or end-market requirements, use 1-794613-2. If RoHS compliance is not required, either part is acceptable based on availability and packaging needs.

Q: Is the contact finish thickness identical between both parts?

A: Yes. Both parts specify gold contact finish at 30.0µin (0.76µm) thickness, ensuring equivalent electrical conductivity and corrosion resistance characteristics.

Q: What is the Moisture Sensitivity Level for both parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.