TE Connectivity 794612-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 794612-1 is a pin contact for rectangular connectors in the Micro MATE-N-LOK series. This stamped pin contact is designed for crimp termination with wire gauges 20-24 AWG and features a tin-lead contact finish. The part is currently active in production with 852 pieces available in new original inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector contact specifications, allowing for interchangeability in applications where the functional requirements remain constant.

Substiute Parts

794612-1

TE Connectivity AMP ConnectorsIn Stock: 864794612-1 Datasheet

Current PartRFQ

1-794612-0

TE Connectivity AMP ConnectorsIn Stock: 318211-794612-0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 794612-1 is determined by the following critical parameters that must remain constant:

• Series Compatibility: Both parts must belong to the Micro MATE-N-LOK series
• Contact Type: Pin configuration with stamped construction
• Termination Method: Crimp termination only
• Wire Gauge Range: 20-24 AWG capacity
• Contact Finish Thickness: 100.0µin (2.54µm) specification
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• Manufacturer: TE Connectivity AMP Connectors

The substitute part 1-794612-0 maintains all these parameters. The primary difference is the contact finish material composition and associated compliance certifications, which do not affect the mechanical or electrical interchangeability of the contact within the connector system.

Parameter Comparison

Engineering Selection Recommendations

Both the 794612-1 and 1-794612-0 are active production parts from TE Connectivity AMP Connectors with identical mechanical and electrical specifications for the Micro MATE-N-LOK series.

The 794612-1 features a tin-lead contact finish and carries RoHS non-compliant status with REACH Affected designation. The 1-794612-0 features a tin contact finish and is ROHS3 compliant with Vendor Undefined REACH status.

Selection between these parts should be based on regulatory compliance requirements and application-specific environmental or industry standards. The 1-794612-0 offers significantly higher inventory availability (31,773 pieces) compared to the 794612-1 (852 pieces), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can 794612-1 and 1-794612-0 be used interchangeably in Micro MATE-N-LOK connectors?

A: Yes. Both parts maintain identical wire gauge capacity (20-24 AWG), contact finish thickness (100.0µin), termination method (crimp), and moisture sensitivity specifications. The contacts are mechanically and electrically interchangeable within the series.

Q: What is the difference between tin-lead and tin contact finishes in these parts?

A: The 794612-1 uses tin-lead plating while the 1-794612-0 uses tin plating. Both finishes are applied to the same 100.0µin thickness. The contact finish material affects compliance certifications but does not alter the mechanical fit or electrical performance within the connector system.

Q: Why does 1-794612-0 show ROHS3 compliance while 794612-1 does not?

A: The tin-lead finish composition in 794612-1 contains lead, which is restricted under RoHS regulations. The tin finish in 1-794612-0 complies with ROHS3 requirements. Selection depends on whether the application or end-use market requires RoHS compliance.

Q: Are there packaging differences between these substitute parts?

A: The 794612-1 packaging is listed as unspecified, while 1-794612-0 is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications before ordering.

Q: What is the base product number relationship between these parts?

A: Both 794612-1 and 1-794612-0 share the base product number 794612, indicating they are variants within the same product family with different finish specifications and compliance profiles.