TE Connectivity 794609-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 794609-3 is a pin contact for rectangular connectors in the Micro MATE-N-LOK series. This stamped gold-plated crimp pin is designed for wire gauges 26-30 AWG and is currently in active production status. The component is used in applications requiring reliable electrical connections with gold contact finish for enhanced conductivity and corrosion resistance.

Identification of substitute parts becomes necessary when the primary part number is unavailable, when packaging requirements differ, or when compliance certifications must be updated to meet specific regulatory requirements.

Substiute Parts

794609-3

TE Connectivity AMP ConnectorsIn Stock: 998794609-3 Datasheet

Current PartRFQ

1-794609-2

TE Connectivity AMP ConnectorsIn Stock: 1608821-794609-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector pin contacts is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Series designation (Micro MATE-N-LOK)
• Pin or Socket classification (Pin)
• Contact Termination method (Crimp)
• Wire Gauge range (26-30 AWG)
• Contact Finish type (Gold)
• Contact Finish Thickness (30.0µin / 0.76µm)
• Stamped construction type

The substitute part 1-794609-2 maintains identical electrical and mechanical specifications to the primary part 794609-3. The primary distinction between these parts is packaging format and RoHS compliance status. Both parts share the same base product number (794609) and are manufactured by TE Connectivity AMP Connectors within the Micro MATE-N-LOK series.

Parameter Comparison

Engineering Selection Recommendations

Part 794609-3 is suitable for applications where bulk packaging is acceptable and RoHS non-compliance does not conflict with project requirements or regulatory constraints. This part maintains active production status and is available in substantial inventory quantities.

Part 1-794609-2 is the appropriate selection when ROHS3 compliance is mandated by design specifications, procurement standards, or end-use regulations. This substitute provides identical electrical and mechanical performance while meeting enhanced environmental compliance requirements. The Tape & Reel packaging format is standard for automated assembly processes and high-volume production environments.

Both parts are functionally interchangeable from an electrical and mechanical standpoint. Selection between them depends on compliance requirements and packaging format compatibility with assembly operations.

Frequently Asked Questions (FAQ)

Q: Are parts 794609-3 and 1-794609-2 electrically equivalent?

A: Yes. Both parts are pin contacts with identical wire gauge range (26-30 AWG), gold contact finish (30.0µin thickness), crimp termination, and Micro MATE-N-LOK series designation. Electrical performance is equivalent.

Q: What is the primary difference between these two parts?

A: The primary differences are packaging format and RoHS compliance status. Part 794609-3 is supplied in bulk packaging and is RoHS non-compliant. Part 1-794609-2 is supplied in Tape & Reel format and is ROHS3 compliant.

Q: Can I use 1-794609-2 as a direct replacement for 794609-3 in my assembly?

A: From an electrical and mechanical standpoint, yes. However, verify that your assembly process is compatible with Tape & Reel packaging format. Additionally, confirm that ROHS3 compliance does not create conflicts with your existing component inventory or procurement specifications.

Q: Does the Tape & Reel packaging affect the contact performance?

A: No. Tape & Reel packaging is a delivery and handling format only. It does not alter the electrical or mechanical properties of the pin contact itself.

Q: Why would I choose the bulk-packaged 794609-3 over the Tape & Reel 1-794609-2?

A: Selection of bulk packaging may be appropriate for low-volume applications, manual assembly processes, or situations where RoHS compliance is not a requirement. Bulk packaging may also be preferred when inventory management systems do not support reel-based component tracking.

Q: Are both parts currently in production?

A: Yes. Both parts maintain active production status with TE Connectivity AMP Connectors.