7830-0006PR Equivalent & Substitute Parts

Part Overview

The 7830-0006PR is a 30-position ribbon cable DIP header connector manufactured by 3M, designed for through-hole mounting with IDC (Insulation Displacement Contact) termination. This connector features a dual-row configuration with 0.100" (2.54mm) board-side pitch and 0.050" (1.27mm) cable pitch, supporting wire gauges from 26 AWG to 30 AWG. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

7830-0006PR

3MIn Stock: 10137830-0006PR Datasheet

Current PartRFQ

AWLP 30/3,2-G

Assmann WSW ComponentsIn Stock: 2228AWLP 30/3,2-G Datasheet

DirectRFQ

1-746610-7

TE Connectivity AMP ConnectorsIn Stock: 75231-746610-7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7830-0006PR is determined by strict alignment of the following critical parameters:

• Connector Type & Configuration: Ribbon cable DIP header with identical 30-position, 2-row layout
• Pitch Specifications: Cable pitch of 0.050" (1.27mm) and board-side pitch of 0.100" (2.54mm) must match exactly
• Mounting & Termination: Through-hole mounting with IDC cable termination
• Electrical Compatibility: Wire gauge support must accommodate the specified range (26–30 AWG)
• Physical Features: Feed-through capability and position loading (all 30 positions loaded)
• Environmental Rating: Moisture sensitivity level 1 (unlimited) for equivalent reliability

The identified substitute parts meet all these criteria and are therefore direct functional equivalents for the obsolete 7830-0006PR.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are active products with current manufacturing support, addressing the obsolescence status of the 7830-0006PR.

AWLP 30/3,2-G (Assmann WSW Components) maintains identical physical and electrical specifications to the original part, including gray color and gold contact finish. This part is ROHS3 compliant and REACH unaffected, with 2212 units in stock. Wire gauge specifications are not detailed in available documentation.

1-746610-7 (TE Connectivity AMP Connectors) provides full functional equivalence with documented wire gauge support (26–28 AWG stranded; 26–30 AWG solid) that encompasses the original part's requirements. This part is ROHS3 compliant and REACH unaffected, with 7501 units in stock. Contact finish is tin rather than gold, and the connector is black rather than gray. The AMP-Latch series designation indicates active product line support.

Selection between these substitutes depends on specific application requirements regarding contact finish material, color coding, and wire gauge documentation needs.

Frequently Asked Questions (FAQ)

Q: Can the AWLP 30/3,2-G and 1-746610-7 be used interchangeably with the 7830-0006PR?

A: Both parts meet the critical functional parameters: 30-position, 2-row configuration; 0.050" cable pitch and 0.100" board-side pitch; through-hole IDC termination; and feed-through capability. Physical differences exist in contact finish (gold vs. tin) and color (gray vs. black), which may affect application-specific requirements such as visual identification or contact resistance specifications.

Q: What wire gauges are supported by each substitute?

A: The 7830-0006PR supports 26 AWG stranded, 28 AWG solid or stranded, and 30 AWG solid. The 1-746610-7 explicitly supports 26–28 AWG stranded and 26–30 AWG solid, fully covering the original specification. Wire gauge data for the AWLP 30/3,2-G is not provided in available documentation.

Q: Are both substitutes RoHS compliant?

A: Yes. Both the AWLP 30/3,2-G and 1-746610-7 are ROHS3 compliant and REACH unaffected, meeting current environmental regulatory requirements.

Q: Does the difference in contact finish (gold vs. tin) affect compatibility?

A: Contact finish affects electrical properties such as contact resistance and corrosion resistance. Gold provides superior corrosion resistance and lower contact resistance, while tin is suitable for standard applications. Selection should be based on specific application environmental conditions and electrical performance requirements.

Q: What is the significance of the AMP-Latch series designation for the 1-746610-7?

A: The AMP-Latch series indicates the product belongs to an active TE Connectivity product line with ongoing manufacturing and support, ensuring long-term availability and supply chain stability.