7826-0000PR Equivalent & Substitute Parts

Part Overview

The 7826-0000PR is a 26-position ribbon cable DIP header connector manufactured by 3M, designed for through-hole mounting applications. This connector features IDC (Insulation Displacement Contact) termination and is classified as an active product. The connector accommodates 26 AWG stranded, 28 AWG solid or stranded, and 30 AWG solid wire gauges. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain compatibility across manufacturing batches and procurement cycles.

Substiute Parts

7826-0000PR

3MIn Stock: 11047826-0000PR Datasheet

Current PartRFQ

AWLP 26/3,2-G

Assmann WSW ComponentsIn Stock: 1527AWLP 26/3,2-G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7826-0000PR is determined by strict alignment of the following critical parameters:

• Connector Type: Ribbon Cable, DIP Header
• Number of Positions: 26
• Cable Pitch: 0.050" (1.27mm)
• Board-Side Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Cable Termination: IDC
• Contact Finish: Gold
• Color: Gray
• Number of Positions Loaded: All

The substitute part AWLP 26/3,2-G manufactured by Assmann WSW Components meets all critical dimensional and functional parameters required for direct substitution in applications utilizing the 7826-0000PR.

Parameter Comparison

Engineering Selection Recommendations

Both the 7826-0000PR and AWLP 26/3,2-G are active products with identical RoHS3 compliance status and REACH unaffected classification. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating no special storage or handling requirements. The parts share identical ECCN and HTSUS classifications, confirming regulatory equivalence. Selection between these parts may be based on availability, lead time, packaging format (both supplied in trays), or procurement preference, as all critical electrical and mechanical parameters are matched.

Frequently Asked Questions (FAQ)

Q: Can AWLP 26/3,2-G be used as a direct replacement for 7826-0000PR in existing designs?

A: Yes. Both connectors share identical pitch specifications (0.050" cable pitch, 0.100" board-side pitch), mounting type (through hole), termination method (IDC), and contact configuration (26 positions, 2 rows). No design modifications are required.

Q: Are there differences in wire gauge compatibility between these parts?

A: The 7826-0000PR specifies compatibility with 26 AWG stranded, 28 AWG solid or stranded, and 30 AWG solid wire gauges. Wire gauge specifications for AWLP 26/3,2-G are not provided in the available data. Verify wire gauge compatibility with the connector manufacturer if this parameter is critical to your application.

Q: Do both connectors require special handling or storage conditions?

A: No. Both parts carry MSL 1 (Unlimited) ratings, indicating no moisture sensitivity restrictions. Standard component storage conditions apply.

Q: Are there any regulatory or compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under identical ECCN (EAR99) and HTSUS (8536.69.4040) codes.

Q: What is the difference between the cable pitch and board-side pitch?

A: Cable pitch (0.050" or 1.27mm) defines the spacing between conductors in the ribbon cable. Board-side pitch (0.100" or 2.54mm) defines the spacing between pins on the PCB-mounted header. Both specifications must match for proper connector mating.