Amphenol ICC 77319-803-08 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 77319-803-08 is a rectangular connector header, right-angle mounted, with 8 positions at 0.100" (2.54mm) pitch. This through-hole component features a 2-row configuration with unshrouded design and push-pull fastening. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement.

Substiute Parts

77319-803-08

Amphenol ICC (FCI)In Stock: 83477319-803-08 Datasheet

Current PartRFQ

98414-G06-26ULF

Amphenol ICC (FCI)In Stock: 132698414-G06-26ULF Datasheet

DirectRFQ

0010894083

MolexIn Stock: 11190010894083 Datasheet

MFR RecommendedRFQ

A1-8PA-2.54DS(93)

Hirose Electric Co LtdIn Stock: 963A1-8PA-2.54DS(93) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 77319-803-08 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 8
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Connector Type: Header with breakaway capability
• Fastening Type: Push-Pull
• Contact Type: Male Pin
• Termination: Solder

Substitute parts must match these parameters to ensure mechanical and electrical compatibility with existing PCB layouts and mating connectors. The following parts meet these criteria:

Direct Equivalent (Recommended):

• Molex 0010894083 (C-Grid 70216 Series)
• Hirose Electric A1-8PA-2.54DS(93) (A1 Series)

Note: Amphenol ICC 98414-G06-26ULF does not qualify as a substitute due to incompatible pitch (0.079" vs 0.100"), position count (26 vs 8), and row spacing specifications.

Parameter Comparison

Engineering Selection Recommendations

Molex 0010894083 is the primary recommended substitute. This part maintains active product status with ROHS3 compliance, ensuring long-term availability and regulatory alignment. The connector matches all critical mechanical and electrical parameters of the 77319-803-08, including pitch, position count, row spacing, mounting orientation, and fastening mechanism. The part is available in production quantities (1099 pcs in stock).

Hirose Electric A1-8PA-2.54DS(93) serves as a secondary alternative. This connector is actively manufactured with RoHS compliance and matches all critical substitution parameters. The operating temperature range (-55°C ~ 85°C) is narrower than the original part (-65°C ~ 130°C), which may limit suitability for extreme temperature applications. Current rating is specified at 3A, matching the original component.

Both substitute parts carry UL94 V-0 flammability ratings and MSL 1 classifications, consistent with the original specification. Selection between these alternatives should be based on application temperature requirements and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0010894083 be used as a direct replacement for the 77319-803-08?

A: Yes. Both connectors share identical pitch (0.100"), position count (8), row configuration (2 rows), row spacing (0.100"), mounting type (through-hole right-angle), and fastening mechanism (push-pull). PCB footprints and mating connector compatibility are preserved.

Q: What is the difference between the Molex and Hirose substitutes?

A: The primary difference is operating temperature range. The Molex part does not specify an operating temperature limit, while the Hirose part is rated -55°C ~ 85°C, which is narrower than the original -65°C ~ 130°C specification. Both parts meet all mechanical and electrical compatibility requirements. Contact material and insulation composition also differ between manufacturers.

Q: Why is the Amphenol ICC 98414-G06-26ULF not a suitable substitute?

A: This part is incompatible due to fundamental parameter mismatches: it has a 0.079" (2.00mm) pitch instead of 0.100" (2.54mm), 26 positions instead of 8, and 2-row spacing of 0.079" instead of 0.100". These differences prevent mechanical mating with existing connectors and PCB layouts designed for the 77319-803-08.

Q: Are there any compliance or certification differences between the original and substitute parts?

A: All three connectors carry UL94 V-0 flammability ratings and MSL 1 classifications. The Molex part is ROHS3 compliant, and the Hirose part is RoHS compliant. The original 77319-803-08 does not specify RoHS status due to its obsolete classification. Both substitutes meet current regulatory requirements.

Q: What packaging formats are available for the substitute parts?

A: The Molex 0010894083 is supplied in tube packaging. The Hirose A1-8PA-2.54DS(93) packaging format is not specified in available data. Confirm packaging requirements with your supplier for production planning.

Q: Can the Hirose part be used in applications requiring the full -65°C ~ 130°C temperature range?

A: No. The Hirose A1-8PA-2.54DS(93) is rated only to -55°C ~ 85°C. For applications requiring the full original temperature range, the Molex 0010894083 is the appropriate choice, though its upper temperature limit is not specified in available documentation.