Amphenol ICC 77315-101-13 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 77315-101-13 is a through-hole, right-angle rectangular connector header with 13 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, which necessitates identification of active equivalent and substitute parts for ongoing design and procurement requirements. The BERGSTIK® series header is designed for board-to-board applications with solder termination and push-pull fastening.

Substiute Parts

77315-101-13

Amphenol ICC (FCI)In Stock: 69177315-101-13 Datasheet

Current PartRFQ

77315-101-13LF

Amphenol ICC (FCI)In Stock: 91877315-101-13LF Datasheet

DirectRFQ

95278-801A08LF

Amphenol ICC (FCI)In Stock: 81195278-801A08LF Datasheet

DirectRFQ

2313-5111-TG

3MIn Stock: 8912313-5111-TG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 77315-101-13 is determined by the following critical parameters:

• Pitch (Mating): 0.100" (2.54mm) - must match exactly
• Number of Positions: 13 positions required
• Mounting Type: Through hole, right angle configuration
• Contact Type: Male pin
• Termination: Solder
• Current Rating: 3A per contact minimum
• Operating Temperature Range: -65°C ~ 125°C
• Material Flammability: UL94 V-0

Direct Equivalent (Same Electrical and Mechanical Function):

• 77315-101-13LF (Amphenol ICC) - Active product, RoHS compliant variant of the main part

Functional Substitute (Different Form Factor):

• 95278-801A08LF (Amphenol ICC) - Surface mount configuration, 8 positions across 2 rows; applicable only where PCB layout permits surface mount technology and position count is compatible

Cross-Manufacturer Equivalent (Different Manufacturer):

• 2313-5111-TG (3M) - Through-hole, right-angle, 13 positions; different series with comparable electrical and mechanical characteristics

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Recommended Primary Choice): The 77315-101-13LF is the direct equivalent of the obsolete 77315-101-13. Both parts maintain identical electrical and mechanical specifications with 13 positions, through-hole right-angle mounting, and 3A per contact current rating. The primary distinction is product status and compliance: 77315-101-13LF is active and RoHS compliant, making it the preferred selection for new designs and ongoing procurement.

For Surface Mount Applications: The 95278-801A08LF is applicable only when PCB design permits surface mount technology. This part differs in mounting type (surface mount vs. through hole) and position count (8 positions across 2 rows vs. 13 positions in 1 row). Selection requires verification that the 8-position, dual-row configuration is compatible with the application's electrical and spatial requirements.

For Cross-Manufacturer Sourcing: The 3M 2313-5111-TG provides a through-hole, right-angle, 13-position alternative from a different manufacturer. This part maintains the same pitch, position count, and mounting orientation. However, the operating temperature range (-55°C ~ 105°C) is narrower than the Amphenol ICC parts (-65°C ~ 125°C), requiring verification that the application's thermal requirements fall within this range. RoHS non-compliance status matches the original part.

Frequently Asked Questions (FAQ)

Q: Can 77315-101-13LF be used as a direct replacement for 77315-101-13? A: Yes. The 77315-101-13LF is the active equivalent with identical electrical and mechanical specifications. The primary differences are product status (active vs. obsolete) and RoHS compliance. Both parts feature 13 positions, 0.100" pitch, through-hole right-angle mounting, and 3A per contact current rating.

Q: What is the key difference between 77315-101-13LF and 95278-801A08LF? A: The 77315-101-13LF is a through-hole, single-row, 13-position header. The 95278-801A08LF is a surface-mount, dual-row, 8-position header. These parts are not direct equivalents; selection depends on PCB assembly technology and position requirements.

Q: Can the 3M 2313-5111-TG replace the Amphenol ICC 77315-101-13? A: The 3M 2313-5111-TG is mechanically and electrically compatible for applications within its operating temperature range (-55°C ~ 105°C). If the application requires the full -65°C ~ 125°C range of the original part, the 3M alternative is not suitable. Verify thermal requirements before selection.

Q: What does RoHS compliance mean for this connector? A: RoHS compliance indicates the part does not contain restricted substances (lead, cadmium, mercury, etc.) as defined by the Restriction of Hazardous Substances Directive. The 77315-101-13LF and 95278-801A08LF are RoHS compliant; the original 77315-101-13 and 3M 2313-5111-TG are not. Selection depends on regulatory and customer requirements.

Q: Are there packaging differences between substitute parts? A: Yes. The 77315-101-13LF is supplied in bulk packaging, while the 95278-801A08LF is supplied in tape and reel format. Packaging selection affects handling, storage, and automated assembly processes. Verify packaging compatibility with procurement and assembly workflows.

Q: What is the significance of the contact finish differences? A: The 77315-101-13 features tin-lead post finish (150.0µin), while 77315-101-13LF uses tin post finish (78.7µin). Both maintain gold or gold GXT™ mating finish. These differences do not affect electrical performance for standard applications but may impact solderability characteristics during assembly.