CTS Resistor Products 768201332JP Equivalent & Substitute Parts

Part Overview

The CTS Resistor Products 768201332JP is a resistor array component rated at 3300 ohm with 5% tolerance in a 20-pin package configuration. This part is classified as obsolete, making identification of equivalent and substitute components necessary for ongoing design support, maintenance, and production continuity. The component is RoHS compliant and carries an MSL rating of 1 (Unlimited), indicating minimal moisture sensitivity concerns during storage and handling.

Substiute Parts

768201332JP

CTS Resistor ProductsIn Stock: 1133768201332JP Datasheet

Current PartRFQ

768201332GP

CTS Resistor ProductsIn Stock: 1027768201332GP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 768201332GP is identified as a direct equivalent from the same manufacturer, CTS Resistor Products. Substitution eligibility is determined by the following core parameters:

Matching Parameters:

• Resistance value: 3.3k ohm (equivalent to 3300 ohm)
• Number of pins: 20-pin configuration
• Manufacturer: CTS Resistor Products (same family)
• Series designation: 768
• RoHS compliance: Both parts meet RoHS requirements
• Moisture sensitivity: MSL 1 (Unlimited) for both parts

Functional Compatibility: The 768201332GP operates as a 19-resistor network array with bussed circuit topology, delivering 100mW power per element. While the substitute part features improved tolerance (±2% versus 5%) and defined temperature coefficient (±100ppm/°C), these represent enhanced specifications that maintain backward compatibility with the original 768201332JP design requirements.

Parameter Comparison

Engineering Selection Recommendations

The 768201332GP is the direct substitute for the obsolete 768201332JP. Selection of this substitute is supported by the following engineering factors:

Product Status Alignment: The substitute part carries an Active product status, ensuring continued availability and manufacturing support from CTS Resistor Products. This addresses the primary limitation of the original obsolete component.

Compliance and Certification: Both parts maintain equivalent regulatory compliance profiles. The substitute achieves ROHS3 compliance, representing current regulatory standards. Both components carry EAR99 export classification and identical HTSUS coding, confirming regulatory interchangeability.

Electrical Specifications: The substitute part delivers improved tolerance specification (±2% versus 5%), which represents an enhancement rather than a compromise to circuit performance. The defined temperature coefficient of ±100ppm/°C and operating range of -55°C to 125°C establish clear performance boundaries for thermal applications.

Physical and Functional Compatibility: The 20-pin configuration and 20-SOIC package specification confirm mechanical compatibility with existing PCB layouts and assembly processes. The surface mount designation aligns with modern manufacturing standards.

Frequently Asked Questions (FAQ)

Q: Can the 768201332GP directly replace the 768201332JP in existing designs?

A: Yes. Both components share identical pin counts (20), resistance values (3300 ohm), and package classifications. The substitute part meets or exceeds all specified parameters of the original component.

Q: What is the significance of the improved tolerance specification in the substitute part?

A: The 768201332GP features ±2% tolerance compared to the original 5% tolerance. This represents improved precision and tighter resistance value control, which enhances circuit performance without requiring design modifications.

Q: Are there any thermal performance differences between these parts?

A: The substitute part specifies a temperature coefficient of ±100ppm/°C and operating range of -55°C to 125°C. These defined parameters ensure predictable performance across temperature variations. The original part specifications do not include these details.

Q: Does the substitute part require different PCB layout or assembly procedures?

A: No. Both components utilize 20-pin configurations and surface mount technology. Existing PCB layouts, assembly processes, and test procedures remain compatible without modification.

Q: What is the inventory status for these parts?

A: The original 768201332JP has 1084 pieces in stock but carries obsolete status. The substitute 768201332GP has 1012 pieces in stock and maintains active product status, ensuring long-term availability.

Q: Are both parts RoHS compliant?

A: Yes. The original part is RoHS compliant, and the substitute achieves ROHS3 compliance, representing current environmental standards. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings.