CTS 767161102JP Resistor Array – Equivalent & Substitute Parts

Part Overview

The CTS 767161102JP is a 1000 ohm resistor array in a 16-pin package configuration, classified as an obsolete product. This component is a resistor network/array designed for applications requiring multiple matched resistive elements in a single package. Due to its obsolete status, equivalent substitute parts are necessary to maintain design continuity and ensure component availability for production and repair applications. The substitute part identified maintains functional compatibility while offering active product status and improved availability.

Substiute Parts

767161102JP

CTS Resistor ProductsIn Stock: 937767161102JP Datasheet

Current PartRFQ

767161102GP

CTS Resistor ProductsIn Stock: 1147767161102GP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The CTS 767161102GP is identified as a direct substitute for the 767161102JP based on the following alignment of critical parameters:

Matching Specifications:

• Resistance value: 1000 ohm (1k) – identical functional requirement
• Number of pins: 16 – maintains pinout compatibility
• Package type: 16-SOIC (0.220", 5.59mm Width) – same physical footprint
• Mounting type: Surface Mount – compatible with existing PCB design
• RoHS compliance: Both parts meet lead-free regulatory standards
• Moisture sensitivity: MSL 1 (Unlimited) – identical handling classification
• ECCN classification: EAR99 – same export control designation

Substitution Logic: The 767161102GP provides functional equivalence through identical resistance value, pin count, and package geometry. The transition from obsolete (767161102JP) to active product status (767161102GP) ensures continued component availability. Both parts are manufactured by CTS Resistor Products within the same product series (767), confirming design compatibility and performance consistency.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: CTS 767161102GP

The 767161102GP is the direct equivalent substitute for the obsolete 767161102JP. Selection of this substitute part is based on the following engineering criteria:

1. Functional Equivalence: Identical resistance value (1000 ohm), pin count (16), and package geometry (16-SOIC) ensure direct PCB compatibility without design modification.

2. Product Status: The substitute part maintains active product status with CTS Resistor Products, ensuring reliable long-term supply chain availability compared to the obsolete main part.

3. Regulatory Compliance: Both parts meet RoHS requirements. The substitute carries ROHS3 certification, confirming compliance with current lead-free manufacturing standards.

4. Electrical Performance Enhancement: The substitute part provides documented electrical specifications including ±2% tolerance (versus 5%), 100mW power per element, and ±100ppm/°C temperature coefficient, offering improved performance predictability.

5. Handling and Storage: Identical MSL 1 (Unlimited) classification confirms equivalent handling requirements and storage conditions.

6. Export Control: Both parts carry identical EAR99 ECCN designation, maintaining consistent export compliance.

Frequently Asked Questions (FAQ)

Q: Can the 767161102GP be used as a direct replacement for the 767161102JP without PCB modification?

A: Yes. Both parts share identical package geometry (16-SOIC with 0.220" width and 5.59mm dimensions), pin count (16), and mounting type (Surface Mount). No PCB redesign or land pattern modification is required.

Q: What is the significance of the tolerance difference between the two parts?

A: The main part specifies 5% tolerance, while the substitute provides ±2% tolerance. The tighter tolerance of the substitute part (767161102GP) offers improved accuracy and consistency in resistor values, which may enhance circuit performance in applications sensitive to resistance variation.

Q: Are there any differences in handling or storage requirements between these parts?

A: No. Both parts carry identical Moisture Sensitivity Level (MSL 1 – Unlimited), indicating equivalent handling, storage, and reflow requirements. No changes to component management procedures are necessary.

Q: Why is the main part classified as obsolete?

A: The 767161102JP is listed as obsolete by the manufacturer, indicating it is no longer in active production. The 767161102GP maintains active product status, ensuring continued availability and manufacturing support.

Q: Does the substitute part meet current regulatory standards?

A: Yes. The 767161102GP carries ROHS3 compliance certification, confirming adherence to current lead-free manufacturing and environmental regulations. Both parts are classified under identical ECCN (EAR99) export control designations.

Q: What is the circuit type configuration of these resistor arrays?

A: The substitute part (767161102GP) is configured as a bussed 15-resistor network with 16 pins. This configuration provides multiple matched resistive elements with a common connection point, suitable for applications requiring parallel or independent resistor functions.

Q: Are there documented operating temperature specifications?

A: The substitute part (767161102GP) specifies an operating temperature range of -55°C to 125°C with a temperature coefficient of ±100ppm/°C. These specifications define the part's performance stability across environmental conditions. The main part does not provide these specifications in the available documentation.