TE Connectivity AMP Connectors 767149-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767149-3 is a 114 Position Connector Plug with outer shroud contacts designed for surface mount applications. This rectangular connector from the MICTOR series features gold-plated contacts and is configured with a 0.025" pitch across 2 rows. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for continued system support and new design implementations.

Substiute Parts

767149-3

TE Connectivity AMP ConnectorsIn Stock: 1079767149-3 Datasheet

Current PartRFQ

5767149-3

TE Connectivity AMP ConnectorsIn Stock: 9725767149-3 Datasheet

DirectRFQ

1-5767121-0

TE Connectivity AMP ConnectorsIn Stock: 8191-5767121-0 Datasheet

Parametric EquivalentRFQ

1-5767149-0

TE Connectivity AMP ConnectorsIn Stock: 7311-5767149-0 Datasheet

Parametric EquivalentRFQ

1-767121-0

TE Connectivity AMP ConnectorsIn Stock: 9941-767121-0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 767149-3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Number of Positions: 114
• Pitch: 0.025" (0.64mm)
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)

Mechanical Parameters:

• Connector Type: Plug, Outer Shroud Contacts
• Number of Rows: 2
• Mounting Type: Surface Mount
• Height Above Board: 0.484" (12.29mm)
• Mated Stacking Heights: 12.57mm, 21.6mm
• Features: Board Guide, Ground Bus (Plane)

Environmental Parameters:

• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• Series: MICTOR

All substitute parts listed maintain identical specifications across these parameters. Differences in product status, RoHS compliance, and packaging format do not affect functional interchangeability in applications where the 767149-3 was originally specified.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: 5767149-3

The 5767149-3 is the direct manufacturer equivalent with identical base product number (5767149) and active product status. This part is ROHS3 compliant and REACH unaffected, providing superior regulatory compliance compared to the obsolete 767149-3. The Tape & Reel packaging format supports automated assembly processes. This part is the preferred selection for new designs and production continuity.

Secondary Recommendation: 1-5767149-0

The 1-5767149-0 shares the same base product number (5767149) as the primary recommendation and maintains active product status with RoHS compliance. This alternative is suitable where Tape & Reel packaging is required and regulatory compliance is a design requirement.

Tertiary Recommendation: 1-5767121-0

The 1-5767121-0 is parametrically equivalent with active product status and RoHS compliance. This part carries a different base product number (5767121) but maintains all critical electrical and mechanical specifications. REACH status is vendor undefined. This option is suitable for applications where the specific base product number is not a design constraint.

Alternative Option: 1-767121-0

The 1-767121-0 maintains parametric equivalence and active product status but retains RoHS non-compliant status consistent with the original 767149-3. This part is suitable only for applications where RoHS compliance is not required and where the base product number 767121 is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the 5767149-3 be used as a direct replacement for the obsolete 767149-3?

A: Yes. The 5767149-3 maintains identical electrical and mechanical specifications across all critical parameters including position count, pitch, contact finish, mounting type, and stacking heights. The primary differences are product status (active versus obsolete) and regulatory compliance (ROHS3 compliant versus non-compliant).

Q: What is the difference between the substitute parts listed?

A: All substitute parts maintain identical connector specifications. Differences exist in base product numbers (767149 versus 767121 versus 5767149 versus 5767121), product status (all active), RoHS compliance status, and REACH regulatory status. These differences do not affect functional interchangeability in applications where the 767149-3 was originally specified.

Q: Does packaging format affect compatibility?

A: Packaging format (Tape & Reel) does not affect the connector's electrical or mechanical performance. The packaging format impacts handling, storage, and assembly process compatibility. All substitute parts are supplied in Tape & Reel format, which supports automated assembly operations.

Q: Are there any restrictions on using these substitute parts in existing designs?

A: No restrictions exist based on the provided specifications. All substitute parts are parametrically equivalent to the 767149-3 across connector type, position count, pitch, contact finish, mounting type, and environmental ratings. Design validation should confirm that regulatory compliance requirements (RoHS, REACH) align with application requirements.

Q: Which substitute part should be selected for new product designs?

A: The 5767149-3 is the recommended selection for new designs due to active product status, ROHS3 compliance, and REACH unaffected status. This part provides the highest level of regulatory compliance and supply chain stability.

Q: What is the significance of the base product number differences?

A: Base product numbers identify the core connector design family. Parts with base number 5767149 or 767149 are direct variants, while parts with base number 5767121 or 767121 represent alternative product lines within the MICTOR series. All maintain identical specifications for the 114-position plug configuration specified.