TE Connectivity AMP Connectors 767143-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767143-5 is a 190 Position Connector Receptacle with Center Strip Contacts, designed for Board Edge Straddle Mount applications. This rectangular connector features Palladium-Nickel contact finish and is part of the MICTOR series. The main part number 767143-5 is classified as Obsolete, making identification of equivalent and substitute parts necessary for ongoing system support and procurement planning. The connector accommodates 0.025" (0.64mm) pitch with 2 rows of contacts and includes Board Guide and Ground Bus (Plane) features.

Substiute Parts

767143-5

TE Connectivity AMP ConnectorsIn Stock: 853767143-5 Datasheet

Current PartRFQ

5767143-5

TE Connectivity AMP ConnectorsIn Stock: 8965767143-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connectors in the MICTOR series is determined by strict equivalence across all electrical and mechanical parameters. The substitute part 5767143-5 qualifies as a direct equivalent based on the following criteria:

Critical Matching Parameters:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 190
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Board Edge, Straddle Mount
• Contact Finish: Palladium-Nickel
• Contact Finish Thickness: 30.0µin (0.76µm)
• Features: Board Guide, Ground Bus (Plane)
• RoHS Compliance: RoHS Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The primary distinction between the main part and the substitute is the product status and packaging configuration. The substitute part 5767143-5 is classified as Active and supplied in Tube packaging, whereas the original 767143-5 is Obsolete with unspecified packaging.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5767143-5 is the direct equivalent for the obsolete 767143-5. Selection between these parts should be based on the following factors:

Product Status Consideration: The original part 767143-5 is classified as Obsolete. The substitute 5767143-5 is classified as Active, indicating ongoing manufacturer support and availability for future procurement cycles.

Compliance Alignment: Both parts maintain identical RoHS Compliance status and REACH Affected designation, ensuring regulatory equivalence for applications subject to these requirements. Both parts carry the same ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Electrical and Mechanical Equivalence: All electrical parameters, mechanical dimensions, contact specifications, and mounting characteristics are identical between the two parts. No functional differences exist in connector performance, signal integrity, or mechanical reliability.

Packaging Difference: The substitute part is supplied in Tube packaging, whereas the original part packaging is not specified. Packaging selection should align with assembly process requirements and inventory management protocols.

Inventory Availability: Both parts maintain substantial stock levels, with 832 units of the original part and 806 units of the substitute part currently available.

Frequently Asked Questions (FAQ)

Q: Can 5767143-5 be used as a direct replacement for 767143-5 in existing designs?

A: Yes. The substitute part 5767143-5 is electrically and mechanically equivalent to 767143-5 across all specified parameters. All connector positions, pitch, mounting configuration, contact finish, and electrical characteristics are identical.

Q: What is the primary reason for substitution?

A: The original part 767143-5 is classified as Obsolete. The substitute 5767143-5 is classified as Active, providing access to ongoing manufacturer support and ensuring long-term procurement availability.

Q: Are there any compliance differences between the two parts?

A: No. Both parts are RoHS Compliant, REACH Affected, and carry identical ECCN and HTSUS classifications. Regulatory compliance is maintained with either part selection.

Q: Does packaging differ between these parts?

A: Yes. The substitute part 5767143-5 is supplied in Tube packaging. The original part 767143-5 packaging is not specified in the available documentation. Packaging selection should be coordinated with assembly and handling requirements.

Q: Are the contact finish specifications identical?

A: Yes. Both parts feature Palladium-Nickel contact finish with 30.0µin (0.76µm) thickness, ensuring identical electrical performance and corrosion resistance characteristics.

Q: What is the Moisture Sensitivity Level for both parts?

A: Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Are both parts from the same manufacturer?

A: Yes. Both parts are manufactured by TE Connectivity AMP Connectors and are part of the MICTOR series.