TE Connectivity AMP Connectors 767117-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767117-6 is a 228-position rectangular connector plug with outer shroud contacts designed for surface mount applications. This connector is part of the MICTOR series and features gold-plated contacts with a 0.025" (0.64mm) pitch configuration across 2 rows. The main part number 767117-6 carries an obsolete product status, making identification of equivalent and substitute parts essential for ongoing design support and procurement continuity.

Substiute Parts

767117-6

TE Connectivity AMP ConnectorsIn Stock: 1205767117-6 Datasheet

Current PartRFQ

5767117-6

TE Connectivity AMP ConnectorsIn Stock: 11965767117-6 Datasheet

DirectRFQ

1-5767007-3

TE Connectivity AMP ConnectorsIn Stock: 7301-5767007-3 Datasheet

Parametric EquivalentRFQ

1-767007-3

TE Connectivity AMP ConnectorsIn Stock: 9081-767007-3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 767117-6 connector is determined by strict alignment of electrical and mechanical parameters. All substitute parts must maintain identical specifications across the following critical parameters:

Electrical Parameters:

• Number of Positions: 228
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)

Mechanical Parameters:

• Connector Type: Plug, Outer Shroud Contacts
• Mounting Type: Surface Mount
• Height Above Board: 0.251" (6.38mm)
• Mated Stacking Heights: 6.6mm, 15.62mm
• Features: Board Guide, Ground Bus (Plane)

Regulatory Parameters:

• ECCN: EAR99
• HTSUS: 8536.69.4040
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these criteria and are classified as parametric equivalents within the MICTOR series.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 1-5767007-3

The part number 1-5767007-3 is the recommended substitute for the obsolete 767117-6. This part maintains complete parametric equivalence across all electrical and mechanical specifications. The 1-5767007-3 carries an active product status and holds ROHS3 compliance certification, providing regulatory alignment for new designs and ongoing production requirements. Inventory availability of 698 pieces supports procurement continuity.

Secondary Substitute: 5767117-6

The part number 5767117-6 is a direct manufacturer equivalent with active product status. This part shares identical electrical and mechanical parameters with the main part number 767117-6. However, 5767117-6 carries RoHS non-compliant status, which may restrict its use in applications subject to RoHS regulations. This part is suitable for legacy system support where RoHS compliance is not required. Inventory availability of 1108 pieces is available.

Tertiary Substitute: 1-767007-3

The part number 1-767007-3 maintains complete parametric equivalence but carries obsolete product status. This part is suitable for direct replacement in existing designs but is not recommended for new product development. RoHS non-compliant status further limits its application scope. Inventory availability of 808 pieces is available.

Frequently Asked Questions (FAQ)

Q: Can 1-5767007-3 be used as a direct replacement for 767117-6 in new designs?

A: Yes. The 1-5767007-3 is a parametric equivalent with identical electrical and mechanical specifications. The active product status and ROHS3 compliance make it suitable for new product development and ongoing production.

Q: What is the difference between 767117-6 and 5767117-6?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The primary difference is product status and RoHS compliance. The 767117-6 is obsolete and RoHS compliant, while 5767117-6 is active but RoHS non-compliant. The base product number differs (767117 versus 5767117).

Q: Are all substitute parts compatible with the same mating connectors?

A: Yes. All substitute parts maintain identical connector type (Plug, Outer Shroud Contacts), pitch (0.025"), position count (228), and row configuration (2 rows). They are mechanically and electrically compatible with the same mating receptacles.

Q: Does packaging differ between substitute parts?

A: Yes. The 5767117-6 and 1-5767007-3 are supplied in tube packaging, while 767117-6 and 1-767007-3 have unspecified packaging. Packaging differences do not affect electrical or mechanical compatibility.

Q: Which substitute part should be selected for RoHS-compliant applications?

A: The 1-5767007-3 is the only substitute with ROHS3 compliance certification. This part is required for applications subject to RoHS regulations.

Q: Are there inventory considerations when selecting a substitute?

A: Yes. Current inventory levels vary: 1-5767007-3 (698 pcs), 5767117-6 (1108 pcs), and 1-767007-3 (808 pcs). Procurement planning should account for these availability levels.

Q: Can 1-767007-3 be used in new product designs?

A: The 1-767007-3 is parametrically equivalent but carries obsolete product status. While it functions identically to the main part, it is not recommended for new designs due to its obsolete classification and RoHS non-compliant status.