TE Connectivity AMP Connectors 767115-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767115-9 is a 76-position rectangular connector receptacle designed for surface mount applications. This connector features center strip contacts with gold plating and is part of the MICTOR series. The part is currently in active product status and is RoHS compliant with unlimited moisture sensitivity rating (MSL 1).

The 767115-9 is supplied in Tape & Reel packaging with 682 pieces currently in stock. Due to component availability, supply chain considerations, or packaging format requirements, equivalent substitute parts may be necessary for procurement or design flexibility.

Substiute Parts

767115-9

TE Connectivity AMP ConnectorsIn Stock: 701767115-9 Datasheet

Current PartRFQ

5767096-9

TE Connectivity AMP ConnectorsIn Stock: 11655767096-9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 767115-9 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Number of positions: 76
• Pitch: 0.025" (0.64mm)
• Number of rows: 2
• Contact finish: Gold
• Contact finish thickness: 30.0µin (0.76µm)

Mechanical Parameters:

• Connector type: Receptacle, Center Strip Contacts
• Mounting type: Surface Mount
• Height above board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm

Compliance Parameters:

• RoHS status: RoHS Compliant or ROHS3 Compliant
• Moisture sensitivity level: MSL 1 (Unlimited)
• ECCN: EAR99
• HTSUS: 8536.69.4040

The primary difference between the main part and its substitute is the packaging format: the 767115-9 is supplied in Tape & Reel (TR) format, while the substitute part 5767096-9 is supplied in Cut Tape (CT) format. Both parts are functionally and mechanically identical and meet the same electrical and compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 767115-9

The 767115-9 is the recommended primary selection for new designs and procurement. This part maintains active product status with TE Connectivity AMP Connectors and is supplied in standard Tape & Reel packaging format suitable for automated assembly processes. The part is RoHS compliant and carries MSL 1 rating, indicating no moisture sensitivity restrictions.

Substitute Selection: 5767096-9

The 5767096-9 serves as a functional equivalent substitute when the 767115-9 is unavailable or when Cut Tape packaging format is required. This part is electrically and mechanically identical to the main part, meeting all electrical specifications, mechanical dimensions, and compliance requirements. The substitute carries ROHS3 compliance, which exceeds the RoHS compliance of the main part. However, the 5767096-9 is classified as obsolete product status, indicating that TE Connectivity AMP Connectors may discontinue this part number. The higher inventory level (1146 pieces) of the substitute part may provide short-term availability advantages.

Compliance Consideration:

Both parts satisfy identical electrical, mechanical, and environmental requirements. The ROHS3 compliance of the substitute part provides enhanced regulatory alignment compared to the standard RoHS compliance of the main part.

Frequently Asked Questions (FAQ)

Q: Are the 767115-9 and 5767096-9 electrically identical?

A: Yes. Both parts are 76-position rectangular connectors with identical electrical specifications, including pitch (0.025"), contact finish (gold at 30.0µin thickness), and connector type (receptacle with center strip contacts).

Q: What is the primary difference between these two parts?

A: The primary difference is packaging format. The 767115-9 is supplied in Tape & Reel (TR) format, while the 5767096-9 is supplied in Cut Tape (CT) format. Both formats contain the same connector component.

Q: Can I use the 5767096-9 as a direct replacement for the 767115-9 in my design?

A: Yes, the 5767096-9 is a direct functional substitute. All electrical, mechanical, and dimensional specifications are identical. The connector will perform identically in the application.

Q: Does the packaging format affect the connector performance?

A: No. Packaging format affects only the supply and handling method. The connector component itself is identical regardless of whether it is supplied in Tape & Reel or Cut Tape format.

Q: What does "obsolete" product status mean for the 5767096-9?

A: Obsolete status indicates that TE Connectivity AMP Connectors has discontinued active production and support for this part number. While the part may remain available from existing inventory, future availability is not guaranteed.

Q: Are both parts RoHS compliant?

A: Yes. The 767115-9 is RoHS compliant, and the 5767096-9 is ROHS3 compliant. Both meet RoHS requirements.

Q: What is the MSL rating for both parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Can I mix components from Tape & Reel and Cut Tape packaging in the same assembly?

A: Yes. Once the connectors are removed from their respective packaging formats, they are identical components and can be used interchangeably in the same assembly.

Q: Which part should I specify for a new design?

A: Specify the 767115-9 for new designs. This part maintains active product status and is the primary offering from TE Connectivity AMP Connectors.

Q: What are the mated stacking height options?

A: Both parts support mated stacking heights of 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm, providing flexibility for various application requirements.