TE Connectivity 767110-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 767110-1 is a 38-position rectangular connector receptacle with center strip contacts designed for surface mount applications. This component features gold-plated contacts, a 0.025" pitch configuration, and is part of the MICTOR series. The part is classified as obsolete, making identification of equivalent and substitute components essential for ongoing production support, design updates, and inventory management.

Substiute Parts

767110-1

TE Connectivity AMP ConnectorsIn Stock: 971767110-1 Datasheet

Current PartRFQ

5767110-1

TE Connectivity AMP ConnectorsIn Stock: 38385767110-1 Datasheet

DirectRFQ

2-5767004-2

TE Connectivity AMP ConnectorsIn Stock: 19532-5767004-2 Datasheet

Parametric EquivalentRFQ

2-767004-2

TE Connectivity AMP ConnectorsIn Stock: 6236602-767004-2 Datasheet

Parametric EquivalentRFQ

5767181-1

TE Connectivity AMP ConnectorsIn Stock: 8475767181-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 767110-1 is determined by strict parametric matching across all critical dimensions and electrical characteristics. The following parameters must remain identical for direct substitution:

• Number of positions: 38
• Pitch: 0.025" (0.64mm)
• Number of rows: 2
• Connector type: Receptacle, Center Strip Contacts
• Mounting type: Surface Mount
• Contact finish: Gold
• Contact finish thickness: 30.0µin (0.76µm)
• Height above board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Series: MICTOR
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these parametric requirements. Differences exist only in product status, RoHS compliance, REACH status, and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: 5767110-1

The 5767110-1 is the direct active equivalent to the obsolete 767110-1. This part maintains identical electrical and mechanical specifications while offering ROHS3 compliance and REACH unaffected status. The part is currently in active production with substantial inventory availability (3732 units). Selection of this part eliminates obsolescence risk and ensures compliance with current regulatory requirements.

Secondary Recommendation: 2-5767004-2

The 2-5767004-2 provides parametric equivalence with active product status and ROHS3 compliance. This part is suitable for applications where the specific base product number variant is acceptable. Inventory availability is adequate at 1940 units.

Alternative Consideration: 5767181-1

The 5767181-1 offers RoHS compliance and active product status. This part is suitable for designs requiring RoHS certification. Inventory is limited at 772 units.

Obsolete Parts: 767110-1 and 2-767004-2

Both obsolete parts present long-term supply chain risk. The 767110-1 is non-compliant with current RoHS requirements. The 2-767004-2, while non-compliant, maintains substantial inventory (623600 units) but carries REACH affected status. New designs should transition to active equivalents.

Frequently Asked Questions (FAQ)

Q: Can 5767110-1 be used as a direct replacement for 767110-1?

A: Yes. The 5767110-1 is parametrically identical to the 767110-1 across all electrical and mechanical specifications. The primary differences are product status (active versus obsolete) and RoHS compliance (ROHS3 compliant versus non-compliant). Electrical and mechanical compatibility is complete.

Q: What is the difference between 5767110-1 and 2-5767004-2?

A: Both parts are parametrically equivalent with identical connector specifications. The difference lies in the base product number designation (5767110 versus 5767004). Both are active products with ROHS3 compliance. Selection between these parts depends on design documentation and procurement specifications.

Q: Why is the 767110-1 listed as obsolete?

A: The 767110-1 is classified as obsolete by TE Connectivity, indicating it is no longer in active production. This status necessitates transition to active equivalents for ongoing supply assurance and regulatory compliance.

Q: Are all substitute parts available in the same packaging?

A: The original 767110-1 packaging is not specified in available documentation. All identified substitute parts are supplied in tube packaging. Packaging configuration should be verified against specific procurement requirements.

Q: What is the significance of RoHS compliance for this connector?

A: RoHS compliance indicates the part meets restrictions on hazardous substances. The 5767110-1, 2-5767004-2, and 5767181-1 are RoHS compliant, while the original 767110-1 and 2-767004-2 are non-compliant. For applications subject to RoHS requirements, compliant parts must be selected.

Q: Can I use 2-767004-2 as a substitute despite its obsolete status?

A: While 2-767004-2 is parametrically equivalent, its obsolete status and RoHS non-compliance make it unsuitable for new designs or long-term production. Active equivalents should be prioritized for supply chain stability and regulatory adherence.

Q: What is the Moisture Sensitivity Level (MSL) for these connectors?

A: All parts in this family, including the 767110-1 and all substitutes, have an MSL rating of 1 (Unlimited). This indicates no moisture sensitivity restrictions and no special storage or handling requirements.

Q: Are the mated stacking heights identical across all substitute parts?

A: Yes. All parts support identical mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm. This ensures mechanical compatibility in multi-connector stacking applications.