TE Connectivity AMP Connectors 767096-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767096-3 is a 114 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This rectangular connector operates at a 0.025" (0.64mm) pitch with dual-row configuration and features gold-plated contacts with board guide and ground bus plane support. The component is classified as Active product status and is currently available in inventory with 1102 pieces in stock.

Identification of equivalent and substitute parts becomes necessary when the primary part number is unavailable, when supply chain requirements demand alternative sourcing options, or when compliance specifications require updated component versions.

Substiute Parts

767096-3

TE Connectivity AMP ConnectorsIn Stock: 1203767096-3 Datasheet

Current PartRFQ

1-5767096-0

TE Connectivity AMP ConnectorsIn Stock: 7991-5767096-0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 767096-3 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 114
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Height Above Board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Mated Stacking Heights: Complete set match
• Moisture Sensitivity Level: 1 (Unlimited)
• Series: MICTOR
• Packaging: Tape & Reel (TR)

The substitute part 1-5767096-0 meets all mandatory matching parameters and is therefore classified as a parametric equivalent. Variations in RoHS compliance status and REACH classification do not affect electrical or mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

767096-3 Selection Criteria: The 767096-3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. This part number maintains Active product status with higher inventory availability at 1102 pieces.

1-5767096-0 Selection Criteria: The 1-5767096-0 is the appropriate selection for applications requiring ROHS3 compliance and REACH-unaffected component sourcing. This substitute part maintains identical electrical and mechanical specifications while offering improved regulatory compliance posture. Inventory availability is 752 pieces.

Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, indicating equivalent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Are 767096-3 and 1-5767096-0 electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical connector type, position count, pitch, row configuration, mounting method, contact finish specifications, and stacking height capabilities. Electrical performance and signal integrity characteristics are equivalent.

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts feature identical mechanical specifications including 0.236" (6.00mm) height above board, board guide and ground bus plane features, and the complete set of mated stacking heights. PCB footprints and mounting requirements are identical.

Q: What is the difference between these part numbers?

A: The primary differences are regulatory compliance status and inventory levels. The 1-5767096-0 is ROHS3 compliant and REACH unaffected, while the 767096-3 is RoHS non-compliant and REACH affected. The 767096-3 has higher current inventory availability.

Q: Which part should I specify for new designs?

A: Selection depends on regulatory requirements for your application. For designs requiring ROHS3 compliance or REACH-unaffected sourcing, specify 1-5767096-0. For applications without these constraints, either part is acceptable based on availability and supply chain considerations.

Q: Are the packaging formats identical?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging format, ensuring identical handling, storage, and automated assembly compatibility.

Q: Do these parts have different moisture sensitivity requirements?

A: No. Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: Can I use these parts interchangeably in existing assemblies?

A: Yes. The identical mechanical and electrical specifications ensure direct substitution in existing PCB designs and assemblies without design modifications or re-qualification.