TE Connectivity AMP Connectors 767096-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767096-2 is a 76-position rectangular connector receptacle designed for surface mount applications. This connector features center strip contacts with gold plating and is part of the MICTOR series. The part is currently in active product status and is available in tape and reel packaging.

The 767096-2 is a high-density connector solution for applications requiring 76 contact positions at 0.025" pitch in a compact surface mount form factor. Identification of equivalent and substitute parts is necessary for design flexibility, supply chain continuity, and accommodation of different packaging requirements or compliance specifications.

Substiute Parts

767096-2

TE Connectivity AMP ConnectorsIn Stock: 734767096-2 Datasheet

Current PartRFQ

5767096-9

TE Connectivity AMP ConnectorsIn Stock: 11655767096-9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 767096-2 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Number of positions: 76
• Pitch: 0.025" (0.64mm)
• Number of rows: 2
• Connector type: Receptacle, Center Strip Contacts
• Contact finish: Gold
• Contact finish thickness: 30.0µin (0.76µm)

Mechanical Compatibility Parameters:

• Mounting type: Surface Mount
• Height above board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm

Environmental Parameters:

• Moisture Sensitivity Level: 1 (Unlimited)
• Series: MICTOR

The substitute part 5767096-9 maintains identical electrical and mechanical specifications. The primary difference is packaging format: the main part is supplied in tape and reel (TR) format, while the substitute is supplied in cut tape (CT) format. Additionally, the substitute part carries ROHS3 compliance status, whereas the main part is RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 767096-2

The 767096-2 is the recommended selection for new designs and applications. This part maintains active product status, ensuring long-term availability and manufacturer support. The tape and reel packaging format is optimized for high-volume automated assembly processes.

Substitute Selection: 5767096-9

The 5767096-9 serves as a functional equivalent for applications where ROHS3 compliance is required. This part is electrically and mechanically identical to the main part and maintains the same contact specifications and mated stacking height compatibility. However, the product status is listed as obsolete, which may impact long-term availability. The cut tape packaging format is suitable for lower-volume or manual assembly operations.

Selection between these parts should be based on:

• Packaging requirements (tape and reel versus cut tape)
• RoHS compliance mandates for the end application
• Supply chain availability and lead time considerations
• Assembly process capabilities

Frequently Asked Questions (FAQ)

Q: Are the 767096-2 and 5767096-9 electrically interchangeable?

A: Yes. Both parts are 76-position receptacles with identical contact pitch (0.025"), contact finish (gold at 30.0µin thickness), and electrical specifications. They are electrically interchangeable in all applications.

Q: Are the 767096-2 and 5767096-9 mechanically interchangeable?

A: Yes. Both parts have identical mounting type (surface mount), height above board (0.236"), board guide and ground bus features, and mated stacking height options. They are mechanically interchangeable on the PCB.

Q: What is the difference between tape and reel (TR) and cut tape (CT) packaging?

A: Tape and reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut tape packaging supplies components on individual tape segments, typically used for lower-volume or manual assembly processes. The electrical and mechanical specifications of the component are identical regardless of packaging format.

Q: Why is the 5767096-9 listed as obsolete if it is still in stock?

A: Product status reflects the manufacturer's current production and support status. Obsolete status indicates the manufacturer is no longer actively producing this part, though existing inventory may remain available. The 767096-2 is the active replacement and should be prioritized for new designs.

Q: Does RoHS compliance affect component performance?

A: RoHS compliance relates to material composition and environmental regulations, not electrical or mechanical performance. Both the RoHS non-compliant 767096-2 and ROHS3 compliant 5767096-9 perform identically in circuit applications. Selection should be based on end-product regulatory requirements.

Q: Can I use the 5767096-9 in place of the 767096-2 in an existing design?

A: Yes, provided your assembly process can accommodate cut tape packaging and your application does not require the active product status of the 767096-2. All electrical and mechanical specifications are identical.

Q: What are the mated stacking heights used for?

A: Mated stacking heights define the distance between the PCB and the mated connector when fully engaged. The available options (6.6mm through 22.86mm) accommodate different application requirements for connector spacing and board-to-board distances.