TE Connectivity AMP Connectors 767095-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767095-7 is a 266 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This rectangular connector features Palladium-Nickel contact finish and is part of the MICTOR series. The part is currently classified as Obsolete, which necessitates identification of equivalent substitute components for ongoing procurement and design continuity. The substitute part maintains identical electrical and mechanical specifications while offering improved product status and compliance characteristics.

Substiute Parts

767095-7

TE Connectivity AMP ConnectorsIn Stock: 876767095-7 Datasheet

Current PartRFQ

5767095-7

TE Connectivity AMP ConnectorsIn Stock: 7725767095-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 767095-7 with the 5767095-7 is based on strict equivalence of the following critical parameters:

Electrical Compatibility Parameters:

• Identical connector type (Receptacle, Center Strip Contacts)
• Identical number of positions (266)
• Identical pitch specification (0.025" / 0.64mm)
• Identical number of rows (2)
• Identical contact finish material and thickness (Palladium-Nickel, 5.00µin)

Mechanical Compatibility Parameters:

• Identical mounting type (Surface Mount)
• Identical height above board (0.587" / 14.91mm)
• Identical mated stacking heights across all configurations
• Identical features (Board Guide, Ground Bus Plane)
• Identical moisture sensitivity level (MSL 1)

Series Designation:

• Both parts belong to the MICTOR series

The substitute part 5767095-7 maintains full electrical and mechanical interchangeability with the original 767095-7 while offering Active product status and RoHS compliance.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 5767095-7

The 5767095-7 is the direct equivalent substitute for the obsolete 767095-7. Selection of this substitute is based on the following engineering criteria:

Product Status Advantage: The substitute part carries Active product status, ensuring continued availability and manufacturer support. The original 767095-7 is classified as Obsolete, which restricts procurement options and future supply reliability.

Compliance Enhancement: The 5767095-7 is RoHS Compliant, meeting current regulatory requirements for electronic components in many jurisdictions. The original part is RoHS non-compliant, which may present restrictions for new designs or applications subject to RoHS regulations.

Electrical and Mechanical Equivalence: All electrical parameters, mechanical dimensions, contact specifications, and mounting characteristics are identical between the two parts. The substitute provides direct form, fit, and function compatibility with existing designs utilizing the 767095-7.

Packaging Consideration: The substitute part is supplied in Tube packaging, which differs from the original part's packaging specification. This packaging difference does not affect electrical or mechanical performance and is a standard distribution format for this component category.

Regulatory Alignment: Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, maintaining consistent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Is the 5767095-7 a direct replacement for the 767095-7?

A: Yes. The 5767095-7 is a direct equivalent substitute. All electrical specifications, mechanical dimensions, contact finishes, and mounting characteristics are identical. The parts are fully interchangeable in existing designs.

Q: What is the primary reason to substitute the 767095-7?

A: The 767095-7 is classified as Obsolete, which limits procurement availability and manufacturer support. The 5767095-7 maintains Active product status, ensuring reliable supply and continued technical support.

Q: Does the substitute part meet RoHS requirements?

A: Yes. The 5767095-7 is RoHS Compliant, whereas the original 767095-7 is RoHS non-compliant. This compliance improvement may be required for applications subject to RoHS regulations.

Q: Are there any differences in connector performance between the two parts?

A: No. Both parts are 266 Position Receptacle connectors with Center Strip Contacts, identical 0.025" pitch, Palladium-Nickel contact finish, and identical mated stacking heights. Performance characteristics are equivalent.

Q: Does the packaging difference affect component selection?

A: No. The substitute part is supplied in Tube packaging, which is a standard distribution format. Packaging does not affect electrical or mechanical performance. Selection should be based on procurement and handling requirements.

Q: Are the contact finish specifications identical?

A: Yes. Both parts feature Palladium-Nickel contact finish with 5.00µin (0.127µm) thickness, ensuring identical electrical contact characteristics and reliability.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have Moisture Sensitivity Level (MSL) 1, which indicates Unlimited shelf life under normal storage conditions. No special moisture control measures are required.

Q: Can the 5767095-7 be used in existing PCB designs without modification?

A: Yes. The substitute part has identical height above board (0.587" / 14.91mm), identical mated stacking heights, and identical mounting type (Surface Mount). No PCB layout or design modifications are required.

Q: Are export classifications the same for both parts?

A: Yes. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, maintaining consistent export control and tariff treatment.