TE Connectivity AMP Connectors 767094-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767094-7 is a 266 Position Connector Receptacle designed for surface mount applications with center strip contacts and palladium-nickel contact finish. This rectangular connector operates within the MICTOR series and is classified as an active product. The connector features a board guide and ground bus plane configuration, supporting multiple mated stacking heights for flexible integration into high-density interconnect applications.

Identification of equivalent and substitute parts becomes necessary when the primary part number experiences inventory constraints, supply chain disruptions, or when design requirements mandate compliance with specific regulatory standards such as RoHS certification.

Substiute Parts

767094-7

TE Connectivity AMP ConnectorsIn Stock: 1053767094-7 Datasheet

Current PartRFQ

5767094-7

TE Connectivity AMP ConnectorsIn Stock: 7615767094-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the main part 767094-7 and the equivalent part 5767094-7 is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Connector type classification (Receptacle, Center Strip Contacts)
• Position count (266 positions)
• Pitch specification (0.025" / 0.64mm)
• Row configuration (2 rows)
• Contact finish material and thickness (Palladium-Nickel, 30.0µin)

Mechanical Compatibility Parameters:

• Mounting technology (Surface Mount)
• Height above board (0.587" / 14.91mm)
• Mated stacking height options (identical range)
• Structural features (Board Guide, Ground Bus Plane)

Environmental Parameters:

• Moisture Sensitivity Level (MSL 1 - Unlimited)
• Series classification (MICTOR)

Both parts maintain identical electrical and mechanical specifications. The primary distinction between these parts relates to regulatory compliance status, specifically RoHS certification.

Parameter Comparison

Engineering Selection Recommendations

For RoHS-Compliant Applications: Select part number 5767094-7. This substitute maintains full electrical and mechanical equivalence to the main part 767094-7 while providing RoHS compliance certification. Both parts are active products with identical specifications across all critical parameters including connector type, position count, pitch, mounting configuration, and contact finish properties.

For Non-Compliant or Legacy Applications: Part number 767094-7 remains available with current inventory of 1005 pieces. This part is suitable for applications where RoHS compliance is not a requirement.

Inventory Considerations: The main part 767094-7 maintains higher inventory availability (1005 pieces) compared to the substitute 5767094-7 (698 pieces). Selection should account for project timeline and supply requirements.

Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, ensuring equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Are parts 767094-7 and 5767094-7 electrically interchangeable?

A: Yes. Both parts are 266-position receptacle connectors with identical electrical specifications including 0.025" pitch, palladium-nickel contact finish at 30.0µin thickness, and center strip contact configuration. They operate within the same MICTOR series and support identical mated stacking heights.

Q: What is the primary difference between these two part numbers?

A: The primary difference is RoHS compliance status. Part 5767094-7 is RoHS compliant, while part 767094-7 is RoHS non-compliant. All other electrical, mechanical, and environmental specifications are identical.

Q: Can I use 5767094-7 as a direct replacement for 767094-7 in my design?

A: Yes, from an electrical and mechanical standpoint, part 5767094-7 is a direct substitute for 767094-7. The connector type, position count, pitch, mounting method, contact finish, and physical dimensions are identical. Selection should be based on regulatory requirements for your application.

Q: Are the mated stacking heights the same for both parts?

A: Yes. Both parts support the identical range of mated stacking heights: 15.62mm, 18mm, 20mm, 21.6mm, 27mm, 27.8mm, 29mm, and 31.9mm.

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the height above board for these connectors?

A: Both parts have a height above board of 0.587" (14.91mm).

Q: Are there any differences in export classification between these parts?

A: No. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.