TE Connectivity AMP Connectors 767094-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767094-2 is a 76-position rectangular connector receptacle designed for surface mount applications. This connector features center strip contacts with palladium-nickel plating and is part of the MICTOR series. The component is classified as Active product status and is currently available in inventory with 1059 pieces in stock.

Identification of equivalent and substitute parts is necessary to support procurement flexibility, manage supply chain continuity, and accommodate design revisions that may require RoHS compliance upgrades or alternative sourcing options.

Substiute Parts

767094-2

TE Connectivity AMP ConnectorsIn Stock: 1157767094-2 Datasheet

Current PartRFQ

5767094-2

TE Connectivity AMP ConnectorsIn Stock: 10135767094-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 767094-2 is determined by strict equivalence across the following critical parameters:

Electrical and Mechanical Compatibility Parameters:

• Number of Positions: 76
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Connector Type: Receptacle, Center Strip Contacts
• Mounting Type: Surface Mount
• Contact Finish: Palladium-Nickel
• Contact Finish Thickness: 30.0µin (0.76µm)
• Height Above Board: 0.587" (14.91mm)
• Features: Board Guide, Ground Bus (Plane)
• Mated Stacking Heights: 15.62mm, 18mm, 20mm, 21.6mm, 27mm, 27.8mm, 29mm, 31.9mm

The substitute part 5767094-2 maintains identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence. The primary distinction between the main part and substitute relates to regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

767094-2 (Main Part): This part is suitable for applications where RoHS compliance is not a design requirement. The component maintains Active product status with established supply availability of 1059 pieces in inventory. Selection of this part is appropriate for legacy systems or applications operating under non-RoHS regulatory frameworks.

5767094-2 (Substitute): This part is the direct functional equivalent with ROHS3 compliance certification. Selection of this substitute is required for designs subject to RoHS3 regulatory requirements or for new product development where environmental compliance standards apply. The substitute maintains identical electrical and mechanical specifications while providing enhanced regulatory compliance. Current inventory availability is 964 pieces.

Both parts are classified as Active products from TE Connectivity AMP Connectors and carry identical ECCN and HTSUS classifications. The selection between these parts is determined by the regulatory compliance requirements of the target application or market.

Frequently Asked Questions (FAQ)

Q: Are the 767094-2 and 5767094-2 electrically and mechanically interchangeable?

A: Yes. Both parts maintain identical specifications across all electrical and mechanical parameters, including 76-position configuration, 0.025" pitch, surface mount mounting type, palladium-nickel contact finish, and board guide features. Direct substitution is supported at the component level.

Q: What is the primary difference between these two parts?

A: The primary difference is regulatory compliance status. The 767094-2 is RoHS non-compliant, while the 5767094-2 is ROHS3 compliant. All other specifications, including connector type, position count, pitch, mounting method, and contact finish, are identical.

Q: Which part should be selected for new product designs?

A: Selection depends on the regulatory requirements of the target market and application. For designs subject to RoHS3 requirements, the 5767094-2 is the appropriate selection. For applications without RoHS compliance mandates, either part may be selected based on availability and supply chain considerations.

Q: Are there any differences in packaging or handling between these parts?

A: Both parts are supplied in tube packaging. Both maintain Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: What are the mated stacking height options for these connectors?

A: Both parts support the following mated stacking heights: 15.62mm, 18mm, 20mm, 21.6mm, 27mm, 27.8mm, 29mm, and 31.9mm. Selection of stacking height is determined by the mating connector specification and application requirements.

Q: Are both parts currently in active production?

A: Yes. Both the 767094-2 and 5767094-2 are classified as Active products by TE Connectivity AMP Connectors, indicating ongoing production and support status.

Q: What is the current inventory status for these parts?

A: The 767094-2 has 1059 pieces available in inventory. The 5767094-2 has 964 pieces available in inventory. Both parts are available as new original stock.