TE Connectivity AMP Connectors 767057-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767057-6 is a 228 Position Connector Plug with outer shroud contacts designed for surface mount applications. This rectangular connector features palladium-nickel contact finish and is part of the MICTOR series. The part is currently classified as obsolete, making identification of equivalent and substitute components necessary for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

767057-6

TE Connectivity AMP ConnectorsIn Stock: 906767057-6 Datasheet

Current PartRFQ

5767057-6

TE Connectivity AMP ConnectorsIn Stock: 10285767057-6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connectors in the MICTOR series is determined by strict equivalence across the following critical parameters:

Position Count and Pitch: The 228-position configuration at 0.025" (0.64mm) pitch defines the connector's signal density and mating interface. Any substitute must maintain identical position count and pitch to ensure mechanical and electrical compatibility with existing receptacles and PCB layouts.

Connector Type and Shroud Configuration: The plug configuration with outer shroud contacts is a fundamental design characteristic. Substitutes must preserve this contact arrangement to maintain proper signal integrity and shielding characteristics.

Mounting Technology: Surface mount mounting type is essential for PCB assembly compatibility. Substitutes must support the same surface mount process and footprint requirements.

Contact Finish Specification: The palladium-nickel finish at 5.00µin thickness defines electrical performance, corrosion resistance, and solderability characteristics. Substitutes must match this finish specification exactly.

Mechanical Dimensions: Height above board (0.484" / 12.29mm) and mated stacking heights (12.57mm, 21.6mm) determine clearance requirements and system integration compatibility. These dimensions must remain constant across substitutes.

Functional Features: Board guide and ground bus plane features are integral to connector performance and must be preserved in substitute components.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5767057-6 provides complete functional and mechanical equivalence to the obsolete 767057-6 across all critical connector parameters. Both components share identical electrical and mechanical specifications, including position count, pitch, mounting type, contact finish, and dimensional characteristics.

The primary distinction between these parts is product status and regulatory compliance. The 767057-6 is classified as obsolete and does not meet RoHS compliance requirements. The 5767057-6 is an active product with RoHS compliant status, making it suitable for new designs and systems requiring current regulatory adherence.

For applications requiring the 767057-6, the 5767057-6 serves as a direct functional replacement with no design modifications necessary. The transition from the obsolete part to the active substitute maintains full compatibility with existing receptacles, PCB layouts, and system integration requirements.

Inventory availability differs between the two parts. The 767057-6 has 830 pieces in stock as new original inventory. The 5767057-6 has 936 pieces in stock as new original inventory, packaged in tube format.

Frequently Asked Questions (FAQ)

Q: Can the 5767057-6 be used as a direct replacement for the 767057-6 in existing designs?

A: Yes. The 5767057-6 is a direct functional equivalent to the 767057-6. All electrical and mechanical parameters are identical, including connector type, position count, pitch, mounting type, contact finish, and dimensional specifications. No design modifications are required for substitution.

Q: What is the difference between the 767057-6 and 5767057-6?

A: The primary differences are product status and regulatory compliance. The 767057-6 is obsolete and RoHS non-compliant. The 5767057-6 is an active product with RoHS compliant status. All functional and mechanical specifications remain identical between the two parts.

Q: Are there any compatibility concerns when switching from 767057-6 to 5767057-6?

A: No compatibility concerns exist. Both parts are MICTOR series rectangular connectors with identical specifications for connector type, position count, pitch, mounting type, contact finish, and dimensions. The 5767057-6 mates with the same receptacles and integrates into the same PCB layouts as the 767057-6.

Q: What does the packaging difference mean for component handling?

A: The 767057-6 packaging information is not specified in the available data. The 5767057-6 is packaged in tube format. Packaging differences do not affect electrical or mechanical performance. Tube packaging is standard for surface mount connectors and provides appropriate protection during storage and handling.

Q: Is the RoHS compliance difference significant for my application?

A: RoHS compliance status depends on application requirements and regulatory jurisdiction. The 5767057-6 meets RoHS compliance requirements, making it suitable for applications and markets requiring RoHS adherence. The 767057-6 does not meet RoHS requirements. For new designs or systems subject to RoHS regulations, the 5767057-6 is the appropriate selection.

Q: Are the contact finish specifications identical between these parts?

A: Yes. Both the 767057-6 and 5767057-6 feature palladium-nickel contact finish at 5.00µin (0.127µm) thickness. Contact finish specifications are identical, ensuring equivalent electrical performance and solderability characteristics.

Q: What are the mated stacking height options for these connectors?

A: Both the 767057-6 and 5767057-6 support mated stacking heights of 12.57mm and 21.6mm. These options accommodate different system integration requirements while maintaining identical connector specifications.