TE Connectivity AMP Connectors 767056-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767056-6 is a 228 Position Connector Plug with outer shroud contacts designed for surface mount applications. This rectangular connector features palladium-nickel contact finish and is part of the MICTOR series. The part is currently classified as obsolete, making identification of equivalent and substitute components essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

767056-6

TE Connectivity AMP ConnectorsIn Stock: 1221767056-6 Datasheet

Current PartRFQ

5767056-6

TE Connectivity AMP ConnectorsIn Stock: 12215767056-6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connectors in the MICTOR series is determined by strict equivalence across the following critical parameters:

Electrical and Mechanical Compatibility Parameters:

• Number of positions (228)
• Pitch specification (0.025" / 0.64mm)
• Number of rows (2)
• Connector type classification (Plug, Outer Shroud Contacts)
• Contact finish composition (Palladium-Nickel)
• Contact finish thickness (5.00µin / 0.127µm)
• Mounting technology (Surface Mount)
• Height above board (0.251" / 6.38mm)
• Mated stacking heights (6.6mm, 15.62mm)
• Presence of board guide and ground bus features

Compliance and Environmental Parameters:

• Series designation (MICTOR)
• Moisture sensitivity level (MSL 1)
• ECCN classification (EAR99)
• HTSUS code (8536.69.4040)

The substitute part 5767056-6 maintains full equivalence across all electrical, mechanical, and environmental parameters specified for the main part 767056-6. The primary distinction between these parts is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity AMP Connectors 5767056-6

The part 5767056-6 is the direct equivalent substitute for the obsolete 767056-6. This substitution is based on complete electrical, mechanical, and environmental parameter equivalence across all critical specifications.

Product Status Consideration: The main part 767056-6 carries an obsolete product status, while the substitute 5767056-6 maintains active product status. This distinction is significant for long-term supply chain planning and component availability. The active status of 5767056-6 ensures continued manufacturing support and inventory availability.

Compliance Alignment: Both parts maintain identical RoHS non-compliance status, ECCN classification (EAR99), and HTSUS coding (8536.69.4040). Both parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture handling requirements during storage or assembly.

Packaging Difference: The substitute part 5767056-6 is supplied in tube packaging, whereas the main part packaging specification is not provided. This packaging difference does not affect electrical or mechanical compatibility and relates only to logistics and handling procedures.

Supply Chain Availability: Current inventory data indicates 1134 pieces of the substitute part 5767056-6 are available in new original condition, compared to 1123 pieces of the obsolete main part. The active product status of the substitute ensures continued availability for future procurement cycles.

Frequently Asked Questions (FAQ)

Q: Can 5767056-6 be used as a direct replacement for 767056-6 in existing designs?

A: Yes. The part 5767056-6 is electrically and mechanically equivalent to 767056-6 across all specified parameters. Both parts are 228-position MICTOR series plugs with identical pitch (0.025"), mounting type (surface mount), contact finish (palladium-nickel), and physical dimensions. Direct substitution is supported without design modification.

Q: What is the primary difference between 767056-6 and 5767056-6?

A: The primary differences are product status and packaging. The 767056-6 is classified as obsolete, while 5767056-6 maintains active product status. The substitute part is supplied in tube packaging. All electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS non-compliance status, ECCN classification (EAR99), HTSUS code (8536.69.4040), and MSL 1 moisture sensitivity level. Compliance profiles are equivalent.

Q: Does the tube packaging of 5767056-6 affect compatibility?

A: No. Packaging format does not affect electrical or mechanical compatibility. Tube packaging relates only to component handling, storage, and assembly logistics. The connector itself maintains identical specifications regardless of packaging configuration.

Q: Why should I transition from 767056-6 to 5767056-6?

A: The obsolete status of 767056-6 creates long-term supply chain risk. The active product status of 5767056-6 ensures continued manufacturing support, inventory availability, and component traceability. Transitioning to the active equivalent part supports design longevity and supply chain stability.

Q: Are the mated stacking heights identical between both parts?

A: Yes. Both 767056-6 and 5767056-6 specify identical mated stacking heights of 6.6mm and 15.62mm. Height above board is also identical at 0.251" (6.38mm). Physical envelope compatibility is maintained.

Q: What is the contact finish specification for both parts?

A: Both parts feature palladium-nickel contact finish with a thickness of 5.00µin (0.127µm). Contact finish composition and thickness are identical, ensuring equivalent electrical performance and environmental resistance.

Q: Can these parts be used in new designs, or are they only for legacy support?

A: The substitute part 5767056-6 carries active product status and is suitable for both new designs and legacy system support. The main part 767056-6, being obsolete, is appropriate only for legacy system maintenance and repair applications where existing inventory must be utilized.