TE Connectivity AMP Connectors 767054-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767054-7 is a 266 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This rectangular connector features Palladium-Nickel contact finish and is part of the MICTOR series. The 767054-7 is classified as Obsolete, making identification of equivalent and substitute parts essential for ongoing system support, maintenance, and new design implementations where compatibility with existing connector interfaces is required.

Substiute Parts

767054-7

TE Connectivity AMP ConnectorsIn Stock: 1109767054-7 Datasheet

Current PartRFQ

5767081-7

TE Connectivity AMP ConnectorsIn Stock: 8765767081-7 Datasheet

Parametric EquivalentRFQ

767081-7

TE Connectivity AMP ConnectorsIn Stock: 960767081-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 767054-7 are determined by strict equivalence across the following critical parameters:

Electrical and Mechanical Compatibility Criteria:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 266
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Palladium-Nickel
• Contact Finish Thickness: 5.00µin (0.127µm)
• Height Above Board: 0.236" (6.00mm)
• Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm
• Features: Board Guide, Ground Bus (Plane)
• Series: MICTOR
• Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed maintain identical electrical and mechanical specifications to the main part number 767054-7, ensuring direct functional interchangeability in applications requiring 266-position rectangular connectors with center strip contacts and surface mount configuration.

Parameter Comparison

Engineering Selection Recommendations

767081-7 Selection Criteria: The 767081-7 is an Active product status equivalent that maintains full electrical and mechanical compatibility with the obsolete 767054-7. This part number is suitable for applications where RoHS non-compliance is acceptable or where legacy system requirements do not mandate RoHS compliance. The 767081-7 provides continuity for existing designs and maintenance applications.

5767081-7 Selection Criteria: The 5767081-7 is an Active product status equivalent with RoHS Compliant certification, making it the preferred choice for new designs, systems requiring environmental compliance, or applications subject to RoHS regulations. This part maintains identical electrical and mechanical specifications to the 767054-7 while offering improved compliance status. The 5767081-7 is suitable for both new implementations and as a long-term replacement strategy for obsolete inventory.

Product Status Consideration: Both substitute parts (767081-7 and 5767081-7) carry Active product status, ensuring ongoing availability and manufacturer support compared to the Obsolete 767054-7. Selection between the two substitutes should be based on compliance requirements and regulatory environment of the application.

Frequently Asked Questions (FAQ)

Q: Can the 767081-7 or 5767081-7 be used as direct replacements for the 767054-7?

A: Yes. Both substitute parts maintain identical electrical and mechanical specifications including connector type, position count, pitch, mounting configuration, contact finish, and stacking heights. Direct functional interchangeability is established across all critical parameters.

Q: What is the difference between 767081-7 and 5767081-7?

A: The primary difference is RoHS compliance status. The 5767081-7 is RoHS Compliant, while the 767081-7 is RoHS non-compliant. Both parts are electrically and mechanically identical. Selection depends on regulatory and compliance requirements of the application.

Q: Why is the 767054-7 listed as Obsolete?

A: The 767054-7 carries Obsolete product status, indicating it is no longer in active production. The Active equivalents 767081-7 and 5767081-7 provide continued availability and manufacturer support for this connector specification.

Q: Are there packaging differences between these part numbers?

A: The 767054-7 packaging is not specified in available documentation. Both substitute parts (767081-7 and 5767081-7) are supplied in Tube packaging. Confirm packaging requirements with procurement specifications before component selection.

Q: What is the Moisture Sensitivity Level (MSL) for these connectors?

A: All three part numbers carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or shelf life.

Q: Are these connectors RoHS compliant?

A: The 767054-7 and 767081-7 are RoHS non-compliant. The 5767081-7 is RoHS Compliant. For applications requiring RoHS compliance, the 5767081-7 is the appropriate selection.

Q: What are the mated stacking height options?

A: All three part numbers support identical mated stacking heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, and 22.86mm. Selection of stacking height depends on application-specific mechanical requirements.

Q: Can these connectors be used in new designs?

A: The 767054-7 is Obsolete and not recommended for new designs. Both 767081-7 and 5767081-7 carry Active status and are suitable for new designs. The 5767081-7 is preferred for new implementations due to RoHS Compliant certification.