TE Connectivity AMP Connectors 767054-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 767054-1 is a 38 Position Connector Receptacle with Center Strip Contacts, Surface Mount configuration, featuring Palladium-Nickel contact finish. This rectangular connector is part of the MICTOR series and is designed for high-density interconnect applications requiring 0.025" (0.64mm) pitch spacing across 2 rows.

The 767054-1 is classified as Obsolete. Identification of equivalent and substitute parts is necessary to support ongoing maintenance, repair, and new design requirements where this connector type is specified or functionally required.

Substiute Parts

767054-1

TE Connectivity AMP ConnectorsIn Stock: 1187767054-1 Datasheet

Current PartRFQ

5767044-1

TE Connectivity AMP ConnectorsIn Stock: 7275767044-1 Datasheet

SimilarRFQ

5767054-1

TE Connectivity AMP ConnectorsIn Stock: 24675767054-1 Datasheet

Parametric EquivalentRFQ

5767081-1

TE Connectivity AMP ConnectorsIn Stock: 8655767081-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 767054-1 are identified based on strict parametric equivalence within the MICTOR rectangular connector series. The primary substitution criteria are:

Critical Parameters for Substitution:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 38
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Series: MICTOR
• Height Above Board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)

Substitute parts are grouped into two categories:

Parametric Equivalents (Full Functional Equivalence): Parts 5767054-1 and 5767081-1 maintain identical electrical and mechanical specifications to the 767054-1, including Surface Mount mounting type, Palladium-Nickel contact finish, and contact finish thickness. These parts are Active status and RoHS3 compliant.

Similar Substitute (Functional Equivalence with Mounting Variation): Part 5767044-1 maintains all critical electrical parameters and connector specifications but differs in mounting type (Board Edge, Straddle Mount versus Surface Mount) and contact finish (Gold versus Palladium-Nickel). This part is suitable for applications where board edge mounting is acceptable.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Obsolete Part Mitigation):

Parts 5767054-1 and 5767081-1 are the primary recommended substitutes for the obsolete 767054-1. Both parts maintain complete parametric equivalence, including Surface Mount configuration, Palladium-Nickel contact finish, and identical electrical specifications. Both substitute parts are Active status and RoHS3 compliant, providing compliance advantages over the original obsolete part. Part 5767054-1 has higher inventory availability (2416 Pcs) compared to 5767081-1 (828 Pcs).

For Applications Permitting Mounting Variation:

Part 5767044-1 is suitable for applications where Board Edge, Straddle Mount configuration is acceptable. This part maintains all critical electrical parameters and connector specifications but features Gold contact finish (30.0µin thickness) instead of Palladium-Nickel. Part 5767044-1 is Active status and RoHS3 compliant. This substitute is appropriate only when PCB layout and mechanical constraints support board edge mounting.

Compliance Considerations:

All substitute parts (5767054-1, 5767081-1, 5767044-1) are RoHS3 compliant, addressing regulatory requirements that the original 767054-1 does not meet. Parts 5767054-1 and 5767081-1 are REACH Unaffected, while 5767044-1 has Vendor Undefined REACH status.

Frequently Asked Questions (FAQ)

Q: Can 5767054-1 or 5767081-1 be used as direct replacements for 767054-1?

A: Yes. Both 5767054-1 and 5767081-1 are parametric equivalents with identical electrical and mechanical specifications. They maintain the same 38-position, 0.025" pitch, 2-row configuration, Surface Mount mounting type, and Palladium-Nickel contact finish. Both are Active status parts, providing supply continuity for the obsolete 767054-1.

Q: What is the difference between 5767054-1 and 5767081-1?

A: Both parts are parametric equivalents with identical specifications. The primary difference is inventory availability: 5767054-1 has 2416 Pcs in stock, while 5767081-1 has 828 Pcs in stock.

Q: Can 5767044-1 be used as a substitute for 767054-1?

A: 5767044-1 is a functional equivalent for applications where mounting type can be changed. It maintains the same 38-position, 0.025" pitch, 2-row configuration and height above board. However, 5767044-1 uses Board Edge, Straddle Mount configuration instead of Surface Mount, and features Gold contact finish instead of Palladium-Nickel. This substitute is appropriate only when PCB design permits board edge mounting.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: connector type (Receptacle, Center Strip Contacts), number of positions (38), pitch (0.025"), number of rows (2), height above board (0.236"), and presence of Board Guide and Ground Bus features. Mounting type and contact finish are secondary parameters that may vary depending on application requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts (5767054-1, 5767081-1, 5767044-1) are RoHS3 compliant. The original 767054-1 is RoHS non-compliant.

Q: What is the difference in contact finish between the substitute parts?

A: Parts 5767054-1 and 5767081-1 maintain Palladium-Nickel contact finish with 5.00µin (0.127µm) thickness, matching the original 767054-1. Part 5767044-1 features Gold contact finish with 30.0µin (0.76µm) thickness, providing enhanced corrosion resistance and contact reliability for board edge mounting applications.

Q: What packaging is available for substitute parts?

A: All substitute parts (5767054-1, 5767081-1, 5767044-1) are supplied in Tube packaging.

Q: Are there any REACH or export control differences between substitute parts?

A: Parts 5767054-1 and 5767081-1 are REACH Unaffected. Part 5767044-1 has Vendor Undefined REACH status. All parts are classified as EAR99 for export control purposes.