Amphenol ICC 76382-416 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76382-416 is a shrouded right-angle header connector with 16 positions at 0.100" (2.54mm) pitch, designed for through-hole board-to-cable/wire applications. This connector features a single-row configuration with friction lock fastening and solder termination. The part is currently listed as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement planning.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	1
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Fastening Type	Friction Lock
Contact Shape	Square
Insulation Material	Polyester, Glass Filled
Material Flammability Rating	UL94 V-0
Series	Dubox™

Substitute Part Grouping Explanation

The 76382-416LF qualifies as a direct substitute based on matching electrical and mechanical parameters. Substitution eligibility is determined by the following criteria:

Identical connector type, contact type, and position count (Header, Male Pin, 16 positions)
Matching pitch specification (0.100" / 2.54mm)
Identical mounting configuration (Through Hole, Right Angle)
Matching shrouding design (Shrouded - 4 Wall)
Identical termination method (Solder) and fastening type (Friction Lock)
Identical contact geometry (Square shape)
Matching insulation material and flammability rating (Polyester, Glass Filled; UL94 V-0)
Same series designation (Dubox™)

The primary distinction between these parts is product status and compliance certification, not functional or mechanical compatibility.

Parameter Comparison

Parameter	76382-416	76382-416LF
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Series	Dubox™	Dubox™
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Number of Positions	16	16
Number of Rows	1	1
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder
Fastening Type	Friction Lock	Friction Lock
Contact Shape	Square	Square
Contact Length - Mating	0.197" (5.00mm)	0.197" (5.00mm)
Contact Length - Post	0.134" (3.40mm)	0.134" (3.40mm)
Insulation Height	0.209" (5.30mm)	0.209" (5.30mm)
Contact Material	Phosphor Bronze	Phosphor Bronze
Insulation Material	Polyester, Glass Filled	Polyester, Glass Filled
Material Flammability Rating	UL94 V-0	UL94 V-0
Insulation Color	Blue	Blue
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040
Product Status	Obsolete	Active
RoHS Status	RoHS non-compliant	RoHS Compliant
REACH Status	REACH Unaffected	REACH Affected
Packaging	-	Tube
Current Rating (Amps)	-	3A
Operating Temperature	-	-40°C ~ 125°C

Engineering Selection Recommendations

The 76382-416LF is the direct functional equivalent for the obsolete 76382-416. Selection between these parts should be based on the following criteria:

For new designs or redesigns: The 76382-416LF is the appropriate choice. This part carries Active product status, is RoHS Compliant, and is REACH Affected, meeting current regulatory requirements for electronic component procurement.

For legacy system support: The 76382-416 may be retained only if existing inventory is available and regulatory compliance is not a procurement requirement. The obsolete status indicates this part is no longer manufactured or supported by Amphenol ICC.

Compliance considerations: The 76382-416LF provides RoHS compliance and REACH documentation, whereas the original part does not. Organizations subject to RoHS or REACH regulations must transition to the 76382-416LF.

Both parts share identical mechanical and electrical interfaces, ensuring direct substitution without circuit board redesign or connector interface modification.

Frequently Asked Questions (FAQ)

Q: Can the 76382-416LF be used as a direct replacement for the 76382-416?

A: Yes. Both parts are mechanically and electrically identical in all functional parameters. The 76382-416LF is the active production equivalent with current regulatory compliance.

Q: What is the difference between the 76382-416 and 76382-416LF?

A: The primary differences are product status (Obsolete vs. Active), RoHS compliance status (non-compliant vs. Compliant), and REACH documentation status (Unaffected vs. Affected). The "LF" designation indicates lead-free contact finish (Tin vs. Tin-Lead). All mechanical and electrical specifications remain identical.

Q: Are there any compatibility issues when substituting the 76382-416LF for the 76382-416?

A: No compatibility issues exist. Both connectors feature identical pitch (0.100" / 2.54mm), contact geometry, mounting configuration, and termination method. Direct board-level substitution is possible without modification.

Q: What is the current availability of the 76382-416?

A: The 76382-416 is listed as Obsolete and is no longer in active production. The 76382-416LF is the current production part with active inventory status.

Q: Does the packaging differ between these parts?

A: Yes. The 76382-416 packaging is not specified, while the 76382-416LF is supplied in Tube packaging. This difference does not affect functional compatibility.

Q: What are the operating temperature specifications?

A: The 76382-416LF operates across -40°C to 125°C. Operating temperature is not specified for the obsolete 76382-416.

Q: Is the 76382-416LF suitable for applications requiring RoHS compliance?

A: Yes. The 76382-416LF is RoHS Compliant and is the appropriate choice for applications subject to RoHS regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message