Amphenol ICC 76382-319 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76382-319 is a through-hole, right-angle rectangular connector header with 19 positions at 2.54mm pitch, designed for board-to-cable/wire applications. The connector features shrouded 4-wall construction with solder termination and friction lock fastening. The main part is classified as obsolete, making identification of active equivalent components essential for ongoing production and maintenance applications.

Substiute Parts

76382-319

Amphenol ICC (FCI)In Stock: 100876382-319 Datasheet

Current PartRFQ

76382-319LF

Amphenol ICC (FCI)In Stock: 90776382-319LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 76382-319 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (19)
• Pitch specification (2.54mm)
• Mounting configuration (Through Hole, Right Angle)
• Shrouding design (Shrouded - 4 Wall)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Insulation material (Polyester, Glass Filled)
• Flammability rating (UL94 V-0)

The 76382-319LF qualifies as a direct substitute based on identical values across all these parameters. Differences in contact finish specifications, operating temperature range, current rating, and regulatory compliance status do not affect mechanical or electrical interchangeability for standard applications.

Parameter Comparison

Engineering Selection Recommendations

The 76382-319LF is the direct active equivalent for the obsolete 76382-319. Selection of the 76382-319LF is appropriate for new designs and replacement applications due to its active product status and RoHS compliance. The 76382-319LF maintains full mechanical and electrical compatibility with the original part across all critical connector specifications.

For applications requiring RoHS non-compliant components, the original 76382-319 remains available in inventory. However, the 76382-319LF is the recommended selection for applications subject to RoHS regulations or requiring components from active product lines.

Frequently Asked Questions (FAQ)

Q: Are the 76382-319 and 76382-319LF mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including pitch, number of positions, mounting type, shrouding configuration, and contact dimensions. They are direct mechanical equivalents.

Q: What is the difference between these two part numbers?

A: The primary differences are product status (obsolete vs. active), RoHS compliance status, contact finish specifications on the post (Tin-Lead vs. Tin), and operating temperature range documentation. These differences do not affect interchangeability for standard applications.

Q: Can I use the 76382-319LF as a replacement for the 76382-319 in existing designs?

A: Yes. The 76382-319LF is a direct substitute. The connector maintains all critical electrical and mechanical parameters required for compatibility with mating components and PCB layouts designed for the 76382-319.

Q: What packaging is available for the 76382-319LF?

A: The 76382-319LF is supplied in Tube packaging, whereas the original 76382-319 packaging specification is not provided in the technical data.

Q: Are there any compliance considerations when switching from 76382-319 to 76382-319LF?

A: The 76382-319LF is RoHS Compliant and REACH Affected, whereas the 76382-319 is RoHS non-compliant and REACH Unaffected. Applications subject to RoHS or REACH regulations should use the 76382-319LF.