Amphenol ICC 76350-106-10 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76350-106-10 is a rectangular connector header, right-angle mounted, with 10 positions at 2.54mm pitch. This through-hole component features a 2-row configuration with unshrouded design and push-pull fastening. The part is classified as obsolete, making identification of functional equivalents necessary for ongoing system support and new design implementations where legacy compatibility is required.

Substiute Parts

76350-106-10

Amphenol ICC (FCI)In Stock: 70076350-106-10 Datasheet

Current PartRFQ

77315-124-02LF

Amphenol ICC (FCI)In Stock: 109277315-124-02LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 76350-106-10 is constrained by the following critical parameters: connector type (header), contact type (male pin), pitch (2.54mm), mounting style (through-hole, right-angle), termination method (solder), fastening mechanism (push-pull), contact material (phosphor bronze), and insulation material (thermoplastic). The substitute part 77315-124-02LF shares the same manufacturer, series designation (BERGSTIK®), pitch specification, mounting orientation, termination method, fastening type, contact material, and insulation material. However, this substitute differs in position count (2 versus 10), row configuration (1 versus 2), and product status (active versus obsolete). The 77315-124-02LF is provided as a reference point within the Amphenol ICC BERGSTIK® family but does not provide direct functional equivalence due to position and row count differences.

Parameter Comparison

Engineering Selection Recommendations

The 76350-106-10 is an obsolete component within the Amphenol ICC BERGSTIK® connector family. The listed substitute, 77315-124-02LF, is an active product with RoHS compliance, representing a modernized alternative within the same manufacturer ecosystem. However, direct substitution is not feasible due to fundamental differences in position count and row configuration. The 77315-124-02LF is a 2-position, single-row header, whereas the 76350-106-10 is a 10-position, dual-row header. Selection of an equivalent part requires matching the specific position and row requirements of the original application. For applications requiring 10-position, 2-row through-hole headers at 2.54mm pitch with right-angle mounting, consultation of the complete Amphenol ICC BERGSTIK® product portfolio is necessary to identify functionally equivalent active alternatives that maintain the same electrical and mechanical interface specifications.

Frequently Asked Questions (FAQ)

Q: Can the 77315-124-02LF directly replace the 76350-106-10?

A: No. The 77315-124-02LF is a 2-position, single-row connector, while the 76350-106-10 is a 10-position, dual-row connector. Direct substitution is not possible due to incompatible position and row configurations.

Q: What parameters must match for a valid substitute?

A: Critical matching parameters include pitch (2.54mm), connector type (header), contact type (male pin), mounting style (through-hole, right-angle), termination method (solder), fastening type (push-pull), contact material (phosphor bronze), and insulation material (thermoplastic). Position count and row configuration must also match the application requirements.

Q: Why is the 76350-106-10 listed as obsolete?

A: The part is classified as obsolete by the manufacturer. Active alternatives within the BERGSTIK® series should be evaluated for new designs or system updates.

Q: Does the 77315-124-02LF offer improved compliance?

A: Yes. The 77315-124-02LF is RoHS compliant, whereas the 76350-106-10 is RoHS non-compliant. The substitute also provides specified operating temperature range (-65°C ~ 125°C) and current rating (3A per contact), which are not specified for the main part.

Q: What is the significance of the breakaway feature on the 77315-124-02LF?

A: The breakaway feature allows individual positions to be separated from the header assembly. This is a design characteristic specific to the 2-position configuration and does not apply to the 10-position main part.

Q: Are there packaging differences between these parts?

A: The 76350-106-10 packaging is not specified in the provided data. The 77315-124-02LF is supplied in bulk packaging. Packaging specifications should be confirmed with the manufacturer for procurement purposes.