Amphenol ICC 76345-804-30 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 76345-804-30 is a through-hole, right-angle rectangular connector header with 30 positions at 2.54mm pitch, designed for board-to-board applications. This component features a 2-row configuration with unshrouded design and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement continuity.

Substiute Parts

76345-804-30

Amphenol ICC (FCI)In Stock: 102376345-804-30 Datasheet

Current PartRFQ

76345-804-30LF

Amphenol ICC (FCI)In Stock: 67276345-804-30LF Datasheet

DirectRFQ

PS-30PE-D4LT1-PN1

JAE ElectronicsIn Stock: 978PS-30PE-D4LT1-PN1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 76345-804-30 is determined by strict alignment with the following critical parameters:

• Connector type: Header
• Contact type: Male pin
• Pitch - mating: 0.100" (2.54mm)
• Number of positions: 30
• Number of rows: 2
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through hole, right angle
• Termination: Solder
• Fastening type: Push-pull
• Shrouding: Unshrouded
• Material flammability rating: UL94 V-0

Two substitute parts meet these criteria: the Amphenol ICC 76345-804-30LF (direct manufacturer variant) and the JAE Electronics PS-30PE-D4LT1-PN1 (cross-manufacturer equivalent). Both maintain identical mating pitch, position count, row configuration, and mounting orientation. Variations in contact finish thickness, insulation material composition, and product status are secondary to the primary electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

The 76345-804-30LF is the primary substitute for the obsolete 76345-804-30. Both parts are manufactured by Amphenol ICC within the BERGSTIK® series and maintain identical electrical and mechanical interface specifications. The 76345-804-30LF differs only in RoHS compliance status (active compliance versus non-compliant) and product status (active versus obsolete). This variant is recommended for applications requiring RoHS-compliant components or where procurement of the original part is no longer feasible.

The PS-30PE-D4LT1-PN1 from JAE Electronics serves as a cross-manufacturer equivalent. While maintaining the same mating pitch, position count, row configuration, and mounting orientation, this part exhibits minor dimensional variations in contact length and insulation height, along with differences in contact finish thickness and insulation material composition. The PS-30PE-D4LT1-PN1 is RoHS compliant and actively manufactured. Selection of this part requires confirmation that the dimensional and material variations do not impact application performance or mechanical fit within the target assembly.

Frequently Asked Questions (FAQ)

Q: Can the 76345-804-30LF be used as a direct replacement for the 76345-804-30?

A: Yes. Both parts share identical mating pitch (0.100" / 2.54mm), position count (30), row configuration (2 rows), row spacing (0.100" / 2.54mm), mounting type (through hole, right angle), contact type (male pin), termination method (solder), and fastening type (push-pull). The primary difference is RoHS compliance status and product lifecycle stage.

Q: What are the key differences between the Amphenol ICC 76345-804-30LF and the JAE Electronics PS-30PE-D4LT1-PN1?

A: Both parts maintain identical mating pitch, position count, row configuration, and mounting orientation. Differences include: contact finish thickness (15.0µin for Amphenol versus 3.90µin for JAE), contact material (phosphor bronze versus copper alloy), insulation material (thermoplastic versus PBT), contact length - mating (0.240" versus 0.236"), contact length - post (0.126" versus 0.110"), and insulation height (0.248" versus 0.260"). These variations may affect mechanical fit and electrical performance in specific applications.

Q: Are all substitute parts RoHS compliant?

A: The 76345-804-30LF and PS-30PE-D4LT1-PN1 are both RoHS compliant. The original 76345-804-30 is RoHS non-compliant.

Q: What is the significance of the contact finish thickness difference between the Amphenol and JAE parts?

A: Contact finish thickness affects contact durability and wear resistance. The Amphenol ICC parts (15.0µin / 0.38µm) provide thicker gold plating compared to the JAE Electronics part (3.90µin / 0.099µm). Applications requiring extended mating cycles or high-reliability performance may benefit from the thicker finish specification.

Q: Can the PS-30PE-D4LT1-PN1 be used in applications designed for the 76345-804-30?

A: Mechanical and electrical interface compatibility is maintained due to identical mating pitch, position count, and row spacing. However, the dimensional variations in contact length and insulation height require confirmation that these differences do not create mechanical interference or fit issues within the target assembly. Contact the design team to validate compatibility before implementation.